500092 Adafruit Wave Shield for Arduino Kit - v1.1

Adafruit Wave Shield for Arduino Kit - v1.1

Aggiungere Audio ad alta qualita', in un progetto, e' spesso difficile. Questo e' uno shield per Arduino, che risolve questo problema. Puo' suonare files audio non compressi fino a 22KHz, 12 bit; di qualsiasi lunghezza. Kit da montare.
Prezzi IVA inclusa
€ 24,81 Prezzo
€ 20,34 + VAT

Qty
 

Dettagli

Adding quality audio to an electronic project is surprisingly difficult. Here is a shield for Arduinos that solves this problem. It can play up to 22KHz, 12bit uncompressed audio files of any length. It's low cost, available as an easy-to-make kit. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read off of an SD/MMC card, which are available at nearly any store. Volume can be controlled with the onboard thumbwheel potentiometer.

This shield is a kit, and comes with all parts you need to build it. Arduino, SD card, tools, speaker and headphones are not included. It is fairly easy to construct and anyone with a successful soldering project under their belt should be able to build it.

The shield comes with an Arduino library for easy use; simply drag uncompressed wave files onto the SD card and plug it in. Then use the library to play audio when buttons are pressed, or when a sensor goes off, or when serial data is received, etc. Audio is played asynchronously as an interrupt, so the Arduino can perform tasks while the audio is playing.

  • Can play any uncompressed 22KHz, 16bit, mono Wave (.wav) files of any size. While it isnt CD quality, it is certainly good enough to play music, have spoken word, or audio effects. Check out the demo video/audio at the webpage
  • Output is mono, into L and R channels, standard 3.5mm headphone jack and a connection for a speaker that is switched on when the headphones are unplugged
  • Files are read off of a FAT16-formatted SD/MMC card 
  • Included library and examples makes playing audio easy
  • Please note that the library is rather bulky, requiring 10K of flash and more than 1/2 K of RAM for buffering audio. It works fine using an ATmega328-based Arduino (Duemilanove, Uno or compatible).
  • This shield is not Mega or Leonardo compatible!

More information, including design notes, schematics, library, examples, etc is at the Wave Shield webpage

Specifiche

Part. No. : 94
Tensione : 5
Tipo Shield : Musica

Tags prodotto

Altre persone hanno selezionato questo prodotto con queste tags:

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit Wave Shield for Arduino Kit - v1.1

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Cavo Audio Stereo Jack 3.5 mm M/M 180cm

    310024 Cavo Audio Stereo Jack 3.5 mm M/M 180cm

    Cavo Audio Stereo Jack 3.5 mm M/M 180cm
    Tasse escluse:
    € 1,57
    IVA inclusa:
    € 1,92
    A partire da:
    € 1,22
      Confronta
  2. Cavo Stereo Jack 3.5 mm a 2 RCA, Blu, Alta qualità - 150cm

    310028 Cavo Stereo Jack 3.5 mm a 2 RCA, Blu, Alta qualità - 150cm

    Cavo Stereo Jack 3.5 mm a 2 RCA, Blu, Alta qualità - 150cm
    Tasse escluse:
    € 7,19
    IVA inclusa:
    € 8,77
      Confronta
  3. Thin Speaker

    710722 Thin Speaker

    If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ofalse
    Tasse escluse:
    € 0,72
    IVA inclusa:
    € 0,88
      Confronta
  4. Purpletooth Jamboree - BC127 Development Board

    711924 Purpletooth Jamboree - BC127 Development Board

    This is the PurpleTooth Jamboree a full-function board, designed to provide audio bridge support through the A2DP, HFP, and Afalse
    Tasse escluse:
    € 45,54
    IVA inclusa:
    € 55,56
      Confronta
  5. WAV Trigger

    713660 WAV Trigger

    The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities.
    Tasse escluse:
    € 38,48
    IVA inclusa:
    € 46,95
      Confronta
  6. Arachnid Labs - Tsunami

    808560 Arachnid Labs - Tsunami

    The Tsunami is a powerful and flexible signal generator built on the Arduino platform. It’s the best way to get started experfalse
    Tasse escluse:
    € 69,90
    IVA inclusa:
    € 85,28
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!