Dettagli
The AM2302 is a wired version of the DHT22, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
Simply connect the red 3-5V power, the yellow wire to your data input pin and the black wire to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! We have written an Arduino library with example code
Compared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature/humidity, but its larger and more expensive
There is a 5.1K resistor inside the sensor connecting VCC and DATA so you do not need any additional pullup resistors
- Low cost
- 3 to 5V power and I/O
- 2.5mA max current use during conversion (while requesting data)
- Good for 0-100% humidity readings with 2-5% accuracy
- Good for -40 to 80°C temperature readings ±0.5°C accuracy
- No more than 0.5 Hz sampling rate (once every 2 seconds)
- Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.53")
- 3 wires 23cm long (9")
- 27mm wide x 58.75mm tall x 13.30mm deep
Downloads:
Tutorials
Specifiche
Part. No. : | 393 |
Questions on AM2302 (wired DHT22) temperature-humidity sensor
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
710167 Humidity and Temperature Sensor - RHT03
The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. -
808430 Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor
Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric pressure afalse -
713683 SparkFun Humidity and Temperature Sensor Breakout - SHT15
The SHT15 Breakout is an easy to use, highly accurate, digital temperature and humidity sensor. This board has been fully calfalse -
713303 SparkFun 6 Degrees of Freedom Breakout - LSM303C
The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as afalse -
808555 Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout
Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we havefalse -
120137 DHT22 Temperature and Humidity Sensor
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibratfalse -
120148 Digital Temperature & humidity sensor (With Stainless Steel Probe)
This is an anti-rust, robust and precise SHT10 sensor, which can master enterprise-class and industrial-level applications.