Teensy 3.2 - E' arrivato il nuovo Teensy!

E' disponibile in pronta consegna il nuovo Microcontrollore Teensy 3.2. Per quei pochi che ancora non lo conoscono, il Teensy e' un Microcontrollore Arduino Compatibile (non proprio al 100% ma quasi... ) estremamente potente, compatto ed affidabile.

La modifica principale rispetto al 3.1 e' l'aggiunta di un regolatore di tensione in grado di fornire fino a 250mA a periferiche esterne. E' 100% compatibile con la versione 3.1 in termini di piedinatura, programmazione e specifiche principali.

Di seguito l'annuncio ufficiale del produttore:

Version 3.2 is a minor upgrade to Teensy 3.1. The main change is an improved 3.3V regulator, to allow Teensy to directly power ESP8266 Wifi, WIZ820io (W5200) Ethernet, and other power-hungry 3.3V devices.

We're specifying Teensy 3.2's power output at 250 mA and the maximum voltage input at 6 volts, due to PCB thermal dissipation limits. However, the actual regulator chip is capable of up to 10 volts input, and up to 500 mA output. These higher limits are intended to allow Teensy 3.2 to be more rugged when used with non-USB power sources which aren't well regulated 5 volt sources.

Teensy 3.2 is fully compatible with all shields and add-on boards designed for Teensy 3.1. It preserves the same size, pinout, and processor as Teensy 3.1.

The bootloader chip is also changed from Mini54 to KL02 (the same as Teensy-LC). A full schematic is available.

Per chi non avesse bisogno delle nuove caratteristiche del Teensy 3.2 e desidera risparmiare qualche euro, e' disponibile il Teensy 3.1 in offerta fino ad esaurimento delle scorte.


Questo post e\' stato pubblicato il News, Risorse and was tagged with teensy

Commenti

Devi effettuare il Login per postare un commento.

Prodotti correlati