Cables/JST Cables

  This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, ...

This is a simple 3 wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare...

This is a simple 4 wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare c...

  This is a simple 6 wire cable. Great for jumping from board to board or just about anything else. They have bare wires on one end and a 6-pin JS...

  This is a simple 4 wire cable. Great for jumping from board to board or just about anything else. They have bare wires on one end and a 4-pin JS...

  This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensi...

This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog ...

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other...

  This is a simple two wire cable. One end has a 2 pin female 0.1" pitch connector. Opposite end has 2-pin JST connector. Dimensions: 130mm Docum...

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have matin...

  This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensi...

  This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, 2-pin Molex 0.1" pitch polarized connec...

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One...

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other....

This 12 cm (4.5″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-e...

This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for oth...

This 30 cm (12″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-en...

This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for oth...

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for othe...

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with a...

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for othe...

This 40 cm (16″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearm...

This 25 cm (10″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearm...

This 75 cm (30″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-en...