711366 Contenitore in Plastica flangiato

Contenitore in Plastica flangiato

Contenitore in Plastica molto robusto, di colore rosso
Prezzi IVA inclusa
€ 13,30 Prezzo
€ 10,90 + VAT

Qty
 

Dettagli

This is the Big Red Box! These beefy, bright red, flanged, plastic enclosures will give your widget the protection (and attention) it deserves. You’ve probably seen these used to enclose radio equipment or antenna baluns as they can be secured to a pole using U-bolts (not included). At about 3mm thick, this 74x158x90mm enclosure has plenty of space for gizmos, gadgets, widgets and doohickeys. The mounting flanges extend 19mm from either edge with two 50mm-spaced 7mm diameter holes.

There’s a rubber gasket around the inside of the lid which forms a dust and moisture resistant seal when the screws are tightened down making the Big Red Box essentially weather/water proof. The lid is secured with six 4mm screws (included).

Documents:

Specifiche

Part. No. : PRT-11366
Cursore : NA
Valore : NA
Pot Scala : NA

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Contenitore in Plastica flangiato

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. SparkFun Big Red Box Proto Board

    713317 SparkFun Big Red Box Proto Board

    The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and instfalse
    Tasse escluse:
    € 7,54
    IVA inclusa:
    € 9,20
      Confronta
  2. Enclosure - Aluminum (120x94.5x34mm)

    713838 Enclosure - Aluminum (120x94.5x34mm)

    These are our large, beefy aluminum enclosures, which have been built tough enough to withstand a truck.
    Tasse escluse:
    € 4,89
    IVA inclusa:
    € 5,97
      Confronta
  3. Enclosure - Aluminum (112x61x31mm)

    713839 Enclosure - Aluminum (112x61x31mm)

    These are our small, beefy aluminum enclosures, which have been built tough enough to withstand a truck.
    Tasse escluse:
    € 5,15
    IVA inclusa:
    € 6,28
      Confronta
  4. Proto Pedal Enclosure

    713967 Proto Pedal Enclosure

    The name of this part pretty much says it all! This is the Proto Pedal Enclosure, a custom-machined aluminum case designed spfalse
    Tasse escluse:
    € 24,10
    IVA inclusa:
    € 29,40
      Confronta