807739 Breadboard-friendly RGB Smart NeoPixel - Pack of 4

Breadboard-friendly RGB Smart NeoPixel - Pack of 4

These pixels have full 24-bit color ability with PWM taken care of by the controller chip. Since the LED is so bright, you need less current/power to get the effects you want. The driver is constant current so its OK if your battery power changes or fluctuates a little.
Prezzi IVA inclusa
€ 9,31 Prezzo
€ 7,63 + VAT

Qty
 

Dettagli

This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on each side for easy soldering, chaining and breadboarding. These ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable - so you only need 1 pin/wire to control as many LEDs as you like. 

These pixels have full 24-bit color ability with PWM taken care of by the controller chip. Since the LED is so bright, you need less current/power to get the effects you want. The driver is constant current so its OK if your battery power changes or fluctuates a little. 

Each pixel draws as much as 60mA (all three RGB LEDs on for full brightness white). An Arduino can drive up to 500 pixels at 30 FPS (it will run out of RAM after that). Using ribbon cable you can string these up to 6" apart (after that, you might get power droops and data corruption) 

Each order comes with 4 individually controllable pixels. In the photos above we show the pixels with headers soldered on, but the pixels do not come with any headers. 

Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)

  • Dimensions: 0.4" x 0.5" x 0.1" / 10.2mm x 12.7mm x 2.5mm
  • 0.5" (12.5mm) diameter circle PCB, 0.1" (2.5mm) total thickness
  • 800 KHz speed protocol
  • Chainable design
  • 5-9VDC power (can run at 3.5V but color will be dimmed), constant current 18.5mA per LED (~55mA max total per pixel)

 

Specifiche

Part. No. : 1312

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Breadboard-friendly RGB Smart NeoPixel - Pack of 4

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix -

    501430 Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix -

    Shield Arduino compatibile con 40 LED RGB NeoPixel, utilizza un solo pin dell'arduino per pilotare tutti i LED
    Tasse escluse:
    € 29,73
    IVA inclusa:
    € 36,27
      Confronta
  2. NeoPixel Ring - 16 x WS2812 5050 RGB LED with Integrated Drivers

    501463 NeoPixel Ring - 16 x WS2812 5050 RGB LED with Integrated Drivers

    Anello con 16 LED Neopixel RGB. Libreria Arduino disponibile.
    Tasse escluse:
    € 10,75
    IVA inclusa:
    € 13,12
      Confronta
  3. WS2812 RGB LED Breakout

    711820 WS2812 RGB LED Breakout

    Modulo con LED RGB WS2812. Questo LED incorpora il circuito di potenza.
    Tasse escluse:
    € 3,51
    IVA inclusa:
    € 4,28
      Confronta
  4. Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

    511487 Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

    Pannello con 64 LED RGB in una matrice 8x8. Si pilota con un solo pin del microcontrollore ed ogni LED e' pilotabile singolarfalse
    Tasse escluse:
    € 38,60
    IVA inclusa:
    € 47,09
      Confronta
  5. NeoPixel Ring - 24 x WS2812 5050 RGB LED with Integrated Drivers

    807603 NeoPixel Ring - 24 x WS2812 5050 RGB LED with Integrated Drivers

    Anello con 24 LED Neopixel RGB. Libreria Arduino disponibile.
    Tasse escluse:
    € 18,13
    IVA inclusa:
    € 22,12
      Confronta