Bargraphs e Matrici di led
-
Driver per LED APA102, si collega al pc tramite connettore USB-C ed appare come un disco USB, non occorre compilare il programma.
Dettagli...
-
This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It e...
Dettagli...
-
This RGB bar graph features an impressive 48 segments of high-brightness LEDs. This common anode bar graph is perfect for proje...
Dettagli...
-
The SparkFun LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED con...
Dettagli...
-
This is the tiniest little LED grid we could make, with 64 full RGB color pixels in a square that is only 1" by 1" sq...
Dettagli...
-
These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project...
Dettagli...
-
Designed to give your projects an edge in their lighting capacity, the SparkFun Lumenati 4-pack is a coin-sized board equipped ...
Dettagli...
-
The SparkFun Lumenati 90L is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position that ...
Dettagli...
-
The SparkFun Lumenati 8-pack is a coin-sized board equipped with seven APA102C LEDs surrounding the outer edge of the board, wi...
Dettagli...
-
Designed to give your projects an edge in their lighting capacity, the SparkFun Lumenati 3x3 is a small, rectangular board equi...
Dettagli...
-
The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions, that has b...
Dettagli...
-
The SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position that ...
Dettagli...
-
What if Scroll pHAT had twice times as many pixels and individual pixel brightness control? Scroll pHAT HD, that's what!!
Dettagli...
-
What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's the Unicorn ...
Dettagli...
-
Scheda per controllare, tramite un Teensy (non incluso), schede LED a matrice e LED strips.
Dettagli...
-
Anello da 76mm con 60 LED APA102 pilotabili indipendentemente
Dettagli...
-
Anello da 50mm con 40 LED APA102 pilotabili indipendentemente
Dettagli...
-
Anello da 25mm con 20 LED APA102 pilotabili indipendentemente
Dettagli...
-
This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It e...
Dettagli...
-
This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It e...
Dettagli...
-
These pixels have full 24-bit color ability with PWM taken care of by the controller chip. Since the LED is so bright, you need...
Dettagli...
-
Make a small linear display with multiple colors using this elegant bi-color LED bargraph. Only 1.2" long, it is quite vis...
Dettagli...
-
What's better than a single LED? Lots of LEDs! A fun way to make a small linear display is to use two 12-bar Bi-color bar-graph...
Dettagli...
-
These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to displ...
Dettagli...
-
Anello con 24 LED Neopixel RGB. Libreria Arduino disponibile.
Dettagli...
-
Pannello con 64 LED RGB in una matrice 8x8. Si pilota con un solo pin del microcontrollore ed ogni LED e' pilotabile singolarme...
Dettagli...
-
Anello con 16 LED Neopixel RGB. Libreria Arduino disponibile.
Dettagli...
-
Barra con 8 LED Neopixel RGB. Libreria Arduino disponibile.
Dettagli...
-
Display a matrice 8x8, con interfaccia I2C, disponibili molti esempi e librerie per Arduino.
Dettagli...
-
The latest and greatest MiniPOV kit to hit the streets - MiniPOV4! We have added full color RGB LEDs to the kit as well USB pro...
Dettagli...
-
This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It e...
Dettagli...
-
This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little...
Dettagli...
-
This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little...
Dettagli...
-
We fit seven of our tiny 5050 (5mm x 5mm) smart RGBW LEDs onto a beautiful, round PCB with mounting holes and a chainable desig...
Dettagli...
-
With four of these you can make a huge ring with 60 ultra bright smart LED NeoPixels are arranged in a circle with a 6.2" ...
Dettagli...
-
With four of these you can make a huge ring with 60 ultra bright smart LED NeoPixels are arranged in a circle with a 6.2" ...
Dettagli...
-
We fit seven of our the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a chainable de...
Dettagli...
-
Each button is 10mm x 10mm square and 10mm tall. There is 5mm of grid spacing between the buttons. You can 'tile' the button pa...
Dettagli...
-
Bargraph lineare da 10 Led di colore Blu. Usabile in mille applicazioni diverse in cui c'è da mostrare un livello (vu-meters, l...
Dettagli...
-
Bargraph lineare da 10 Led di colore Rosso. Usabile in mille applicazioni diverse in cui c'è da mostrare un livello (vu-meters,...
Dettagli...