Dettagli
Oof - you got a Raspberry Pi Model A+ or B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable. It has a 40-pin socket on one end, but only the first 26 pins have a cable and the other end matches any sort of Cobbler or PermaPi or what-have-you.
Cable is 6" long, and pin #1 is marked with a white wire. This cable is not compatible with the Raspberry Pi Model A or B - It's for the A+ and B+ only!
Available in slimming Adafruit Black - pin #1 is marked with a white stripe!
Note: The Raspberry Pi Model A+ is also compatible with this product!
Dimensions:
- 173mm x 33mm / 6.8" x 1.3"
- Weight: 14.4g
Specifiche
Part. No. : | 1986 |
Questions on Downgrade GPIO Ribbon Cable for Raspberry Pi A+/B+ 40p to 26p
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
501432 Pi GPIO Reference Board
Scheda di riferimento per semplificare la connessione alle porte GPIO del Raspberry PI -
807883 Raspberry Pi Model B+ 512MB RAM
Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse -
713028 Raspberry Pi B+ - GPIO Ribbon Cable (40-pin, 6")
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherafalse