712779 EasyDriver Stepper Motor Driver

EasyDriver Stepper Motor Driver

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
Prezzi IVA inclusa
€ 12,43 Prezzo
€ 10,19 + VAT

 

Dettagli

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.

This EasyDriver V4.5 has been co-designed with Brian Schmalz. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development.

Features:

  • A3967 Microstepping Driver
  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
  • Compatible with 4, 6, and 8 wire stepper motors of any voltage
  • Adjustable current control from 150mA/phase to 700mA/phase
  • Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speeds

Documents:

Specifiche

Part. No. : ROB-12779

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on EasyDriver Stepper Motor Driver

Sort by Descending
  • 22/07/17 11.54 Questa scheda è compatibile con il motore stepper CODICE: 709238 ?
    • Certamente!
    • Do you find this question helpful?  Si   No
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 2133 - DRV8825 Stepper Motor Driver Carrier, High Current

    582133 2133 - DRV8825 Stepper Motor Driver Carrier, High Current

    Modulo di controllo per motori passo passo. Gestisce un motore bipolare, fino a 1.5A per fase, fino a 2.2A con dissipatore (nfalse
    Tasse escluse:
    € 7,43
    IVA inclusa:
    € 9,06
      Confronta
  2. 2128 - A4988 Stepper Motor Driver Carrier, Black Edition

    342128 2128 - A4988 Stepper Motor Driver Carrier, Black Edition

    This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrefalse
    Tasse escluse:
    € 6,27
    IVA inclusa:
    € 7,65
      Confronta
  3. Big Easy Driver

    712859 Big Easy Driver

    The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase.
    Tasse escluse:
    € 16,15
    IVA inclusa:
    € 19,70
      Confronta
  4. 2970 - AMIS-30543 Stepper Motor Driver Carrier

    342970 2970 - AMIS-30543 Stepper Motor Driver Carrier

    This is a breakout board for ON Semiconductor’s AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjfalse
    Tasse escluse:
    € 19,00
    IVA inclusa:
    € 23,18
      Confronta
  5. 2971 - DRV8880 Stepper Motor Driver Carrier

    342971 2971 - DRV8880 Stepper Motor Driver Carrier

    This breakout board for TI’s DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurfalse
    Tasse escluse:
    € 5,84
    IVA inclusa:
    € 7,12
      Confronta
  6. 3131 - Tic T825 USB Multi-Interface Stepper Motor Controller

    343131 3131 - Tic T825 USB Multi-Interface Stepper Motor Controller

    The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalse
    Tasse escluse:
    € 65,00
    IVA inclusa:
    € 79,30
      Confronta
  7. 3132 - Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

    343132 3132 - Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

    Controllo motori stepper (passo-passo) multi interfaccia. Configurabile tramite USB con il software scaricabile. Il controllefalse
    Tasse escluse:
    € 64,00
    IVA inclusa:
    € 78,08
      Confronta
  8. 3753 - Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)

    343753 3753 - Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)

    This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges sfalse
    Tasse escluse:
    € 78,00
    IVA inclusa:
    € 95,16
      Confronta
  9. TB6600 Stepper Motor Driver

    120043 TB6600 Stepper Motor Driver

    TB6600 arduino is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is comfalse
    Tasse escluse:
    € 16,16
    IVA inclusa:
    € 19,72
      Confronta
  10. 3135 - Tic T500 USB Multi-Interface Stepper Motor Controller

    343135 3135 - Tic T500 USB Multi-Interface Stepper Motor Controller

    Controllo motori stepper (passo-passo) multi interfaccia. Configurabile tramite USB con il software scaricabile. Il controllefalse
    Tasse escluse:
    € 18,81
    IVA inclusa:
    € 22,95
      Confronta
  11. 2974 - TB67S279FTG Stepper Motor Driver Carrier

    342974 2974 - TB67S279FTG Stepper Motor Driver Carrier

    Controller per motore stepper bipolare basato sul chip Toshiba TB67S279FTG. Corrente regolabile, sette risoluzioni di microstfalse
    Tasse escluse:
    € 12,50
    IVA inclusa:
    € 15,25
      Confronta
  12. 2973 - TB67S249FTG Stepper Motor Driver Carrier

    342973 2973 - TB67S249FTG Stepper Motor Driver Carrier

    Controller per motore stepper bipolare basato sul chip Toshiba TB67S279FTG. Corrente regolabile, sette risoluzioni di microstfalse
    Tasse escluse:
    € 14,00
    IVA inclusa:
    € 17,08
      Confronta
  13. 3149 - Jrk G2 24v21 USB Motor Controller with Feedback

    343149 3149 - Jrk G2 24v21 USB Motor Controller with Feedback

    Motor controller ad anello chiuso, controllo della posizione o della velocita'. Controlla un motore a spazzole. Configurabilefalse
    Tasse escluse:
    € 142,00
    IVA inclusa:
    € 173,24
      Confronta
  14. 3139 - Tic T249 USB Multi-Interface Stepper Motor Controller

    343139 3139 - Tic T249 USB Multi-Interface Stepper Motor Controller

    Controllo motori stepper (passo-passo) multi interfaccia. Configurabile tramite USB con il software scaricabile. Il controllefalse
    Tasse escluse:
    € 28,84
    IVA inclusa:
    € 35,18
      Confronta
  15. 3730 - Pololu High-Power Stepper Motor Driver 36v4

    343730 3730 - Pololu High-Power Stepper Motor Driver 36v4

    Controllo per un motore Stepper (passo passo) con potenza max di 4A per fase (6A max*). Si configura con interfaccia SPI
    Tasse escluse:
    € 42,00
    IVA inclusa:
    € 51,24
      Confronta
  16. 2998 - TB67S128FTG Stepper Motor Driver Carrier

    342998 2998 - TB67S128FTG Stepper Motor Driver Carrier

    Controller per motore stepper bipolare basato sul chip Toshiba TB67S128FTG. Corrente regolabile, sette risoluzioni di microstfalse
    Tasse escluse:
    € 10,24
    IVA inclusa:
    € 12,49
      Confronta