342813 2813 - Big Pushbutton Power Switch with Reverse Voltage Protection, HP

2813 - Big Pushbutton Power Switch with Reverse Voltage Protection, HP

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches.
Prezzi IVA inclusa
€ 10,74 Prezzo
€ 8,80 + VAT

 

Dettagli

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off. Additional control inputs allow advanced applications such as automatic shutdown by the device being powered. This HP version operates from 4.5 V to 40 V and can deliver continuous currents up to around 16 A.

The Pololu Pushbutton Power Switch is a compact, solid-state power switch that features built-in reverse-voltage protection and is controlled by a momentary pushbutton: one push turns on power and another push turns it off. This is a patented design initially created for use in our own products as an alternative to bulky mechanical switches. Because the switched current does not flow through the mechanical switch, a large variety of small, low-power switches can be used to control a substantial amount of power. The use of momentary switches also allows multiple switches to be used in parallel to control the power to one load.

The board has a small pushbutton already installed and offers convenient points for connecting external pushbutton or tactile switches in parallel. It also offers several alternate pushbutton connection options that result in push-on-only or push-off-only operation, and additional inputs enable further power control options like allowing the load to turn off its own power, which can be beneficial when used with battery chemistries sensitive to over-discharging.

Warning: Do not use this switch as an emergency cutoff or similar safety disconnect in applications where failure to cut power could lead to injury or property damage.

Benefits and limitations

The Pololu Pushbutton Power Switch works well in its intended application as a DC power switch for small robots, but because it is fundamentally different from a mechanical power switch, the benefits and drawbacks of the components must be fully considered.

Benefits over mechanical switches:

  • Compact size
  • Reverse-voltage protection
  • Allows multiple (parallel) switches for improved user interface
  • Better turn-on characteristics than a bouncing mechanical switch
  • Limited LC spikes for low-resistance loads
  • Allows self-shutoff (OFF input)
  • Allows external digital device to control the power state (ON and CTRL inputs)
  • Breadboard and perfboard compatible (0.1″-pitch)

Drawbacks compared to mechanical switches:

  • Switch is one-directional (power applied to VOUT cannot be switched to VIN)
  • Limited operating voltage range
  • Switch can lose its state when power is disconnected (the switch typically defaults to being off when power is first applied, but it can default to being on near the upper end of the operating range)
  • Switches DC only (does not maintain state through power disruptions or excessive noise)
  • No complete isolation in off state

Dimensions

Size: 0.8″ × 1.0″ × 0.16″1
Weight: 2.7 g1

General specifications

Current rating: 16 A2
Minimum operating voltage: 4.5 V
Maximum operating voltage: 40 V3
Reverse voltage protection?: Y

Identifying markings

PCB dev codes: psw03b
Other PCB markings: 0J9255

Notes:

1 Without included optional connectors.
2 Continuous at 12 V, without exceeding 150°C.
3 Recommended maximum is 32 V.

Block diagram and input details of the Big Pushbutton Power Switch with Reverse Voltage Protection (594k pdf)

Specifiche

Part. No. : 2813
Interfaccia : n/a

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 2813 - Big Pushbutton Power Switch with Reverse Voltage Protection, HP

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 2812 - Big Pushbutton Power Switch with Reverse Voltage Protection, MP

    342812 2812 - Big Pushbutton Power Switch with Reverse Voltage Protection, MP

    The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches.
    Tasse escluse:
    € 4,97
    IVA inclusa:
    € 6,06
      Confronta
  2. 2814 - Big MOSFET Slide Switch with Reverse Voltage Protection, MP

    342814 2814 - Big MOSFET Slide Switch with Reverse Voltage Protection, MP

    It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to aroundfalse
    Tasse escluse:
    € 4,47
    IVA inclusa:
    € 5,45
      Confronta
  3. 2815 - Big MOSFET Slide Switch with Reverse Voltage Protection, HP

    342815 2815 - Big MOSFET Slide Switch with Reverse Voltage Protection, HP

    This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to contrfalse
    Tasse escluse:
    € 5,81
    IVA inclusa:
    € 7,09
      Confronta
  4. 2810 - Mini MOSFET Slide Switch with Reverse Voltage Protection, LV

    342810 2810 - Mini MOSFET Slide Switch with Reverse Voltage Protection, LV

    This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to contrfalse
    Tasse escluse:
    € 3,50
    IVA inclusa:
    € 4,27
      Confronta