Salta il contenuto

Lingua

SKU 420115

Gearmotor 12Vdc 66RPM Encoder

Esaurito
Prezzo originale €21,85 - Prezzo originale €21,85
Prezzo originale
€21,85
€21,85 - €21,85
Prezzo attuale €21,85

Tutti i prezzi sono IVA inclusa

Disponibilità:
Esaurito
Richiesta Sconto per Quantita' e Informazioni

SIX POLES MAGNET:THREE PULSES FOR MOTOR TURN HALL-EFFECT SWITCHES

These Hall-effect switches are highly tempertature stable and stress-resistant sensors best utilized in applications that provide steep magnetic slopes and low residual levels of magnetic flux density. Each device includes a voltage regulator, quadratic Hall voltage generator, temperature stability circuit, signal amplifier, Schmitt trigger and open collector output on a single silicon chip. The on-board regulator permits operation with supply voltages of 4,5 to 24 V. The switch output can sink up to 20 mA with suitable output pull up, they can be used directly with bipolar or MOS logic circuits.

  • VDR interference suppression on the collector
  • Direction of rotation depending on polarity
  • Can be mounted in any position
  • Maximum radial shaft load: 50N
  • Maximum axial shaft load: 10N
  • Temperature range: -20°C/60°C
  • Works with: Motor Mind B and the 3A Motor Controller

 

Technical Specifications :
Item #
420115
Nominal Voltage Vdc
12
12
12
No Load Current mA
140
140
140
Max Current mA
680
580
440
Max Torque Kg/cm
5.1
6.12
10.2
Reduction Ratio
76.84:1

94.37:1

198.5:1
No Load Speed RPM
81
66
33
Speed at Max Torque RPM
55
45
23
Shaft Diameter mm
6
6
6
Lenght mm
66.5
66.5
69
Weight gr
190
190
190


Encoder Technical Specifications:
Supply Voltage
4.5 ... 24 Vdc
Output Saturation Voltage
150 ... 400 mV
Output Leakage Current
<1 ... 10 µA
Supply Current
4.7 ... 8 mA
Output Rise Time
0.04 ... 2 µs
Output Fall Time
0.18 ... 2 µs

Encoder Connections:
Red: + Motor
3 Blue: Out
2 Green: GND
1 Brown: Vcc (Hall)
Black: - Motor