Dettagli
XBee Carrier is a Wireless Sensor Network (WSN) base board designed for Bee series and groves. It is primarily suitable for standalone Bee Nodes like RFBee, Wifi Bee which have ATMega328 onboard. It is compatible with RFBee, Wifi Bee , XBee andBluetooth Bee. Besides a Bee receptacle, there are also two Grove connectors. The board cab be powered by a lithium batteryor through USB cable. You can use a Wireless charger, Solar Panel or the USB cable to charge the battery. The FT232RL chip onboard helps in downloading the program to Bee Module directly.
Bees which do not have ATMega328 like Bluetooth Bee can only be configured by using on-board FT232RL(USB to UART). Theses Bees are not suitable for standalone applications.
The on-board FT232RL can be used like any other 3.3V USB to UART interface when not connected to any Bee Modules. This is useful for programming a 3.3V MCU through Serial Port.
Features
- Bees compatible receptacle
- Two grove connector - one for I2C and other for D6,D5
- Two grove place holders
- On-Board Charge Controller CN3063
- On-Board 3.3V LDO Lownoise Micropower Regulator - RT9167A_33PB
- On-board FT232RL UBS-UART IC
- LEDs for PWR, charge indication and UART transmission.
- Power switch
- Reset button
- 2.0mm pitch JST connector for Battery and Charger.
Application Ideas
- Wireless Sensor Network with Standalone Bee Node like Wifi Bee.
- As a configuration aid for Bees using FT232RL.
- Charger for Lithium Ion Cells using on-board charge controller.
- As a FT232RL based 3.3v USB-UART.
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials.
Specifiche
Part. No. : | 113020004 |
Questions on Grove - XBee Carrier
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
550011 XBee Serie 1 - Antenna a Chip
Il modulo XBee e' una soluzione compatibile con lo standard ZigBee/IEEE 802.15.4 che soddisfa la necessita' di una rete a basfalse -
550013 XBee PRO Serie 1 - Antenna a filo
Il modulo XBee e' una soluzione compatibile con lo standard ZigBee/IEEE 802.15.4 che soddisfa la necessita' di una rete a basfalse -
990001 XBee - Simple Board
La XBee - Simple Board e' stata progettata per consentire una connessione semplice ed affidabile tra i moduli XBee e la vostrfalsePrezzo di listino:€ 6,92OffertaTasse escluse:€ 5,00IVA inclusa:€ 6,10Prezzo IVA incl.
Confronta -
550029 XBee Serie 2 - Antenna a Chip
XBee Serie 2 con antenna a Chip. Implementa lo stack ZigBee 2007. -
550030 XBee Serie 2 - Antenna a Filo
Modello XB24-Z7WIT-004. XBee Serie 2 con antenna a Filo. Implementa lo stack ZigBee 2007. -
115123 Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack)
Cavo universale Grove a 4 pin, versione con clip di bloccaggio. -
115124 Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)
Cavo universale Grove a 4 pin, versione con clip di bloccaggio. -
807949 Grove - Bee Socket
Grove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bfalse -
808083 Grove - 3-Axis Digital Gyro
Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processfalse