Dettagli
The LM158 series consists of two independent, high gain,
internally frequency compensated operational amplifiers
which were designed specifically to operate from a single
power supply over a wide range of voltages. Operation from
split power supplies is also possible and the low power
supply current drain is independent of the magnitude of the
power supply voltage.
Application areas include transducer amplifiers, dc gain
blocks and all the conventional op amp circuits which now
can be more easily implemented in single power supply
systems. For example, the LM158 series can be directly
operated off of the standard +5V power supply voltage which
is used in digital systems and will easily provide the required
interface electronics without requiring the additional ±15V
power supplies.
The LM358 and LM2904 are available in a chip sized package
(8-Bump micro SMD) using National’s micro SMD package
technology.
Unique Characteristics
- In the linear mode the input common-mode voltage
range includes ground and the output voltage can also
swing to ground, even though operated from only a
single power supply voltage. - The unity gain cross frequency is temperature
compensated. - The input bias current is also temperature compensated.
Advantages
- Two internally compensated op amps
- Eliminates need for dual supplies
- Allows direct sensing near GND and VOUT also goes to GND
- Compatible with all forms of logic
- Power drain suitable for battery operation Features
- Available in 8-Bump micro SMD chip sized package,(See AN-1112)
- Internally frequency compensated for unity gain
- Large dc voltage gain: 100 dB
- Wide bandwidth (unity gain): 1 MHz (temperature compensated)
- Wide power supply range:
— Single supply: 3V to 32V
— or dual supplies: ±1.5V to ±16V - Very low supply current drain (500 μA)—essentially
independent of supply voltage - Low input offset voltage: 2 mV
- Input common-mode voltage range includes ground
- Differential input voltage range equal to the power supply voltage
- Large output voltage swing
Datasheet (1MB)
Questions on LM358N - Amplificatore operazionale duale
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
400001 LM741CN amplificatore operazionale
Il 741 non ha certo bisogno di presentazioni, e' un amplificatore operazionale utile in migliaia di applicazioni. -
400005 LM324N Amplificatore Operazionale Quadruplo
Questo operazionale ha molte caratteristiche eccezionali, una fra tutte: non necessita dell'alimentazione duale positiva e nefalse -
400008 TLC272CP Amplificatore operazionale di precisione
Questo integrato, ad alta tecnologia, racchiude due amplificatori operazionali di precisione. -
802260 TL072C - Amplificatore operazionale doppio
Amplificatore operazionale doppio, a basso rumore, con ingresso JFET ad alta impendenza. Formato DIP8. -
802261 TL074C - Amplificatore operazionale quadruplo
Amplificatore operazionale quadruplo, a basso rumore, con ingresso JFET ad alta impendenza. Formato DIP14. -
802271 LM3900N - Amplificatore Operazionale Quadruplo
Amplificatore Operazionale Quadruplo - DIP14 -
808006 Op Amp - Dual Rail-to-Rail - 2.7-6V power @ 80mA output
Amplificatore operazionale molto versatile, elevata potenza di uscita, ampio range di alimentazione, caratteristiche generalifalse