808236 Mesh Bee - Open Source Zigbee Pro Module with MCU (JN5168)

Mesh Bee - Open Source Zigbee Pro Module with MCU (JN5168)

Mesh Bee is a 2.4GHz wireless transceiver from seeed studio. It's based on NXP's newly JN516x series wireless microcontroller chip and supports ZigBee Pro network stack.
Categorie
Prezzi IVA inclusa
€ 23,23 Prezzo
€ 19,04 + VAT

Qty
 

Dettagli

Mesh Bee is a 2.4GHz wireless transceiver from seeed studio. It's based on NXP's newly JN516x series wireless microcontroller chip and supports ZigBee Pro network stack. The factory firmware wraps the complicated ZigBee stack operation into a few easy to use serial commands, and drives Mesh Bee into a transparent serial communication node that can be part of a simple point-to-point connection or a complex mesh network. Moreover, Mesh Bee is totally open hardware and open sourced, which means that you can customize the firmware on your requirements. You can use JN516x's ARM core to control things and JenOS to simplify your development. The development environment and tools from NXP are all free. Mesh Bee will bring you lots of fun. 
 
Feature:
  • Range: Indoor/Urban: up to 30m; Outdoor line-of-sight: up to 100m;
  • Receiver Sensitivity: -95dBm
  • Data Transmission Rate: 4800, 9600, 19200, 38400, 57600, 115200 (bps)
  • Working Frequency: unlicensed 2.4GHz band
  • Communication type: Point to Point or Start Network or Mesh Network
  • OTA support: update node's firmware on-the-air
  • Easy-to-Use Serial Interface and rich extendable ports
  • Easy-to-Use AT Command: Setup ZigBee network, Set Serial Baud Rate, etc.
  • Open source Hardware and Firmware
  • Programmable 32-bit RISC CPU: 32M clock, 256KB Flash, 32KB RAM, 4KB EEPROM
  • Socket compatible with the Xbee, so you can plug it into any Xbee socket as a quick replacement. 
 
Note: Mesh Bee will not communicate with Xbee as the ZigBee stack versions they're using are different. 
 
Specification:
  • Microprocessor :JN5168 (32-bit RISC CPU, 32MHz clock speed)
  • Resources :256kB/32kB/4kB (Flash/RAM/EEPROM)
  • PCB size :24.5mmx30.5mmx0.8mm
  • Outline Dimension :24.5mmx30.5mmx9.77mm
  • Indicators :No
  • Power supply :3.3V
  • IO counts :12
  • ADC input :3(2 multiplexing with IO)
  • Interfaces :UARTx2, SPI, I2C
  • Program interface :UART+MISO
  • Connectivity :Socket compatible with XBee
  • Communication Protocol :Uart(TTL)
  • Operating Frequency Band :2.4GHz
  • Stack/Software :RF4CE, JenNet-IP , ZigBee Pro

 

Resources 

 
Documents
Please visit our wiki page for more info about this product.

Specifiche

Part. No. : 814003001

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Mesh Bee - Open Source Zigbee Pro Module with MCU (JN5168)

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. XBee - USB Board

    990002 XBee - USB Board

    La scheda XBee - USB Board e' stata progettata per consentire una connessione semplice ed affidabile tra i moduli XBee ed il PC.
    Tasse escluse:
    € 16,83
    IVA inclusa:
    € 20,53
      Confronta
  2. XBee - Simple Board

    990001 XBee - Simple Board

    La XBee - Simple Board e' stata progettata per consentire una connessione semplice ed affidabile tra i moduli XBee e la vostrfalse
    Tasse escluse:
    € 5,67
    IVA inclusa:
    € 6,92
      Confronta
  3. Scheda Seriale DTE per XBee

    990006 Scheda Seriale DTE per XBee

    La scheda DTE per XBee puo' essere connessa a qualsiasi dispositivo seriale (DCE) dotato di connettore DB9 femmina come servofalse
    Prezzo di listino:
    € 17,19
    Offerta
    Tasse escluse:
    € 10,00
    IVA inclusa:
    € 12,20
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!