709695 MPR121 Capacitive Touch Sensor Breakout Board

MPR121 Capacitive Touch Sensor Breakout Board

Modulo con sensore MPR121QR2 capacitive touch sensor della Freescale. Il sensore MPR121 e' un sensore capacitivo con interfaccia I2C. Il chip puo' controllare fino a 12 elettrodi individuali e fino a 30 elettrodi simulati.
Categorie
Prezzi IVA inclusa
€ 7,82 Prezzo
€ 6,41 + VAT

Qty
 

Dettagli


This is a breakout board for Freescale's MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don't require the pull-up resistors you can open the jumpers by cutting the trace connecting them.

There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can't operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).

Documents:

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on MPR121 Capacitive Touch Sensor Breakout Board

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

    807929 Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

    The MPR121 has support for only I2C, which can be implemented with nearly any microcontroller. You can select one of 4 addresfalse
    Tasse escluse:
    € 7,36
    IVA inclusa:
    € 8,98
      Confronta
  2. Adafruit TSL2591 High Dynamic Range Digital Light Sensor

    807932 Adafruit TSL2591 High Dynamic Range Digital Light Sensor

    The TSL2591 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comparefalse
    Tasse escluse:
    € 6,44
    IVA inclusa:
    € 7,86
      Confronta
  3. Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121

    808302 Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121

    This touch-able add on shield for Arduinos will inspire your next interactive project with 12 capacitive touch sensors. Capacfalse
    Tasse escluse:
    € 11,56
    IVA inclusa:
    € 14,10
      Confronta
  4. SparkFun Touch Potentiometer

    713144 SparkFun Touch Potentiometer

    The SparkFun Touch Potentiometer, or Touch Pot for short, is an intelligent linear capacitive touch sensor that implements pofalse
    Tasse escluse:
    € 19,24
    IVA inclusa:
    € 23,47
      Confronta
  5. Thermocouple Connector - PCC-SMP-K

    713612 Thermocouple Connector - PCC-SMP-K

    This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.
    Tasse escluse:
    € 5,00
    IVA inclusa:
    € 6,10
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!