Dettagli
Description: This is a simple, but very powerful stepper motor with a 4-wire cable attached.
This is a Bipolar Motor.
Features:
- Step Angle (degrees) :1.8
- 2 Phase
- Rated Voltage : 12V
- Rated Current : 0.33A
- Holding Torque : 2.3kg*cm
- 5mm Diameter Drive Shaft
- Winding resistance: 32.6 Ω
- Winding inductance: 48 mH
- Max flux linkage: 1.8 Vs
- Maximum Detent Torque: 0.016 N.M
- Total inertia (kg.m.m): 3.5 Kg.m.m
- Total friction (kg.m/s): 4 Kg.m/s
- NEMA 16
- SM-42BYG011-25
Documents:
Specifiche
Part. No. : | ROB-09238 |
NEMA : | 16 |
WINDING : | Bipolar |
Diam. Asse mm : | 5 |
Questions on Stepper Motor with cable
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
711611 AutoDriver - Stepper Motor Controller
Motor Controller per motori Passo Passo bipolari, basato sul chip L6470. Si pilota con protocollo SPIPrezzo di listino:€ 34,25OffertaTasse escluse:€ 23,00IVA inclusa:€ 28,06Prezzo IVA incl.
Confronta -
710848 Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)
Motore Passo Passo con asse filettato. Utilizzabile come attuatore lineare.