808277 PiTFT 2.8" TFT 320x240 + Capacitive Touchscreen

PiTFT 2.8" TFT 320x240 + Capacitive Touchscreen

Featuring a 2.8" display with 320x240 16-bit color pixels and a single-touch capacitive touch overlay.
Categorie
Prezzi IVA inclusa
€ 50,94 Prezzo
€ 41,75 + VAT

Qty
 

Dettagli

Our best-selling PiTFT 2.8" display just got a fancy upgrade, now we have a version with a capacitive touchscreen! That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay.

Featuring a 2.8" display with 320x240 16-bit color pixels and a single-touch capacitive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

It's designed to fit nicely onto the Pi Model A or B rev 2 but also works perfectly fine with the Model B+ as long as you don't mind the PCB overhangs the USB ports by 5mm (see the photos above). Model A+ works great too.  Model B rev 1 have an older layout for the I2C pins and won't be able to use the touch screen. Please note, we are still working on Pi 2 support for this screen!

Uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button. See below for the link to get the optional tact switches, they're not included.

The screen is the same size as the resistive type so you can use this with the PiTFT PiBow or any other enclosure you may already have. We also use the same SDL device and signals so PyGame and X11 based programs can be swapped in with no changes in code.

New, as of Feb 25 2015, This version now comes assembled, with a 2x13 extra-tall female header (to connect the plate to the Pi) and a 2x13 male header that can be used to connect an IDC cable or cobbler from the side. The photos above also show the optional installed slim tactile buttons. The tactile buttons are not included.

  • Display current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA.
  • Screen Dimensions: 50mm x 69mm x 4mm / 2" x 2.7" x 0.16"
  • PCB Dimensions: 56mm x 85mm x 2mm / 2.2" x 3.4" x 0.08"
  • Weight: 44g

Product revisions:

  • Feb 25, 2015 this product now comes assembled

Adafruit 2.8" PiTFT - Capacitive Touch A little screen, with a fancy captouch

Specifiche

Part. No. : 1983
Tipo Shield : Display
Interfaccia : SPI

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on PiTFT 2.8" TFT 320x240 + Capacitive Touchscreen

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. PiTFT - Assembled 320x240 2.8" TFT+Touchscreen for Raspberry Pi

    807604 PiTFT - Assembled 320x240 2.8" TFT+Touchscreen for Raspberry Pi

    2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interfacefalse
    Tasse escluse:
    € 37,12
    IVA inclusa:
    € 45,29
      Confronta
  2. PiTFT Enclosure for Raspberry Pi Model B

    807928 PiTFT Enclosure for Raspberry Pi Model B

    Need a way to protect your Pi while your adorable PiTFT is still connected? Adafruit on the case! Sorry about the pun but we'false
    Tasse escluse:
    € 9,44
    IVA inclusa:
    € 11,52
      Confronta
  3. PiTFT - Assembled 480x320 3.5" TFT+Touchscreen for Raspberry Pi

    808002 PiTFT - Assembled 480x320 3.5" TFT+Touchscreen for Raspberry Pi

    3.5" display with 480x320 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interfacefalse
    Tasse escluse:
    € 47,67
    IVA inclusa:
    € 58,16
      Confronta
  4. Pi Model B+ / Pi 2 Case Base - Clear

    808556 Pi Model B+ / Pi 2 Case Base - Clear

    This enclosure was designed by Mike Doell. It's made of ultra-durable, super-glossy polycarbonate, and is both good looking false
    Tasse escluse:
    € 5,52
    IVA inclusa:
    € 6,73
      Confronta