808837 Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

For precision temperature sensing, nothing beats a Platinum RTD
Categorie
Prezzi IVA inclusa
€ 15,68 Prezzo
€ 12,85 + VAT

 

Dettagli

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus the name PT100. Compared to most NTC/PTC thermistors, the PT type of RTD is much most stable and precise (but also more expensive) PT100's have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy (better than thermocouples), repeatability, and stability. 

This high-temperature PT100 sensor is equipped with an stainless steel shield is good for up to 550°C.

PT100 features:

  • Based on resistance measurement principles
  • Resistor material is Platinum with a value of 100 ohm at temperature 0°C
  • Platinum has a positive resistance temperature factor; resistance increases with rising temperature
  • Resistance variation is a function of temperature: 0.385Ω/°C nominal
  • High accuracy and stability compared to thermocouples, silicon-based temperature sensors, or thermistors

Each sensor comes with three wires. Two of the wires connect to either side of the platinum resistor like you'd expect. The third wire is also connected to one end of the PT100. If your RTD amplifier supports 3-wire sensors, it will drive the resistor with the first two wires, and measure the voltage differences so that it can subtract any voltage drop from the wires. If your RTD amplifier only has 2-wire support simply leave the third wire disconnected.

  • Cable specs:

    • Stainless steel tube: 4mm diameter by ~30mm long (size of stainless steel capsule may vary!)
    • Cable is approx 1m / 100cm long
    • Contains a PT100 temperature sensor
    • Three wires with terminal prong ends

    PT100 technical specs:

    • Usable temperature range: -200 to 550°C (-328°F to +1,022°F)
    • Uses 3-wire interface
    • ±0.5°C Accuracy from -10°C to +85°C

    Product Weight: 19.3g / 0.7oz

Specifiche

Part. No. : 3290

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Thermocouple Type-K - Stainless Steel SEN-13715

    713715 Thermocouple Type-K - Stainless Steel SEN-13715

    This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, confalse
    Tasse escluse:
    € 5,55
    IVA inclusa:
    € 6,77
      Confronta
  2. TMP4104 - K-Type Fiberglass Bead Probe Thermocouple (-40°C to +400°C)

    194104 TMP4104 - K-Type Fiberglass Bead Probe Thermocouple (-40°C to +400°C)

    The TMP4104 thermocouple can measure temperatures between -40°C to +400°C with a ±0.75°C accuracy.
    Tasse escluse:
    € 15,80
    IVA inclusa:
    € 19,28
      Confronta
  3. Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865

    808836 Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865

    In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus the name PT100.
    Tasse escluse:
    € 16,02
    IVA inclusa:
    € 19,54
      Confronta
  4. Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K

    808849 Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K

    The '855 is great but if you have a lot of thermocouples to measure it isn't terribly easy to use. That's why we are also carfalse
    Tasse escluse:
    € 16,02
    IVA inclusa:
    € 19,54
      Confronta