Salta il contenuto

Lingua

SKU 807136

RN-41-EK - Roving Networks RN41 Bluetooth Evaluation Kit

Esaurito
Prezzo originale €40,99 - Prezzo originale €40,99
Prezzo originale
€40,99
€40,99 - €40,99
Prezzo attuale €40,99

Tutti i prezzi sono IVA inclusa

Disponibilità:
Esaurito
Richiesta Sconto per Quantita' e Informazioni

The RN-41-EK is an evaluation kit for the RN41 module.  The board has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL UART interface.  The status LEDs, switches, and signal headers enable rapid prototyping and integration into existing systems. 

The module supports the SPP/DUN and HCI Bluetooth interface protocols, is simple to design in, and fully certified. With a high performance on-chip antenna and support for Bluetooth Enhanced Data Rate (EDR), the RN41 delivers up to 3 Mbps data rates for distances to 100 M. 

The module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over Bluetooth. Additionally, the module can automatically wake up, send data to a remote host, and go back to a low-power sleep state.  The RN41 module is the perfect method for adding Bluetooth wireless capability to existing products without redesign, saving significant time and money.

FEATURES

  • Evaluation board with USB interface
  • Fully certified Bluetooth 2.1+EDR/2.1/2.0/1.2/1.1 module
  • Low power (8 - 30 mA connected, 2 mA idle)
  • Sustained SPP data rates - 240 Kbps (slave), 300 Kbps (master)
  • HCI data rates: 1.5 Mbps sustained, 3.0 Mbps burst in HCI mode
  • Supports various modes including HCI and SPP/DUN
  • Embedded Bluetooth stack profiles included (requires no host stack): GAP, SDP, RFCOMM and L2CAP, with SPP, DUN and HID profiles
  • Bluetooth SIG qualified, end product listing
  • Certifications: FCC, IC, CE
  • Environmentally friendly, RoHS compliant

APPLICATIONS

  • Cable replacement
  • Barcode scanners
  • Measurement and monitoring systems
  • Industrial sensors and controls
  • Medical devices
  • Asset tracking

SPECIFICATIONS

Bluetooth Versions

2.1 + EDR, 2.0, 1.2, 1.1

Data rate

240 Kbps (slave), 300Kbps (master), HCI mode: 1.5 Mbps sustained, 3 Mbps burst

Frequency Band

2.412 - 2.484 GHz

Modulation Techniques

FHSS/GFSK modulation, 79 channels at 1 MHz intervals

Profiles

SPP (default firmware), DUN, HID, iAP, HCI, RFCOM, L2CAP, SDP

Supply voltage

3.3V to 16V DC (depending on header used)

Output power

+15 dBm

Power consumption

Standby/Idle 25 mA : Connected (normal mode) 30 mA : Connected (low power Sniff) 8 mA : Standby/Idle (Deep sleep enabled) 250µA

Operating temperature range

-40C to +85C

Interface

UART, USB

Antenna

Chip

Size

1.75" x 0.91" x 0.20" (44.5 x 23 x 5 mm)

Certifications

FCC, IC, EN, CE, Bluetooth SIG