808305 Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit

Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit

This HAT adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.
Categorie
Prezzi IVA inclusa
€ 23,91 Prezzo
€ 19,60 + VAT

Qty
 

Dettagli

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.

For use with Raspberry Pi Model A+, B+, or Pi 2 can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20.

The Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins!

Best of all, we even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation com to life. The Adafruit PWM/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! Please check out our detailed tutorial for lots more information including diagrams, schematics, installation instructions and more

Each order comes with a Servo HAT, a 2-pin terminal block, four 3x4 headers and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead.

Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply. 

  • Dimensions w/ components: 65mm x 56mm x 13mm / 2.6" x 2.2" x 0.5"

Specifiche

Part. No. : 2327

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Raspberry Pi Model B+ 512MB RAM

    807883 Raspberry Pi Model B+ 512MB RAM

    Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse
    Tasse escluse:
    € 30,30
    IVA inclusa:
    € 36,97
      Confronta
  2. Raspberry Pi Model A+ 256MB RAM

    808190 Raspberry Pi Model A+ 256MB RAM

    The Raspberry Pi Model A+ is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the modfalse
    Tasse escluse:
    € 38,00
    IVA inclusa:
    € 46,36
      Confronta
  3. Raspberry Pi 2 Model B - 1GB RAM

    808238 Raspberry Pi 2 Model B - 1GB RAM

    The new Raspberry Pi 2 - Model B is jam packed with features! With a new quad core processor and twice the memory with a massfalse
    Tasse escluse:
    € 41,20
    IVA inclusa:
    € 50,26
      Confronta
  4. SparkFun Pi Servo HAT

    714328 SparkFun Pi Servo HAT

    The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated mafalse
    Tasse escluse:
    € 11,51
    IVA inclusa:
    € 14,04
      Confronta