Raspberry Pi 3 - Model B - ARMv8 with 1G RAM
Tutti i prezzi sono IVA inclusa
There are two giant upgrades in the Pi 3. The first is a next generation Quad Core Broadcom BCM2837 64-bit ARMv8 processor, making the processor speed increase from 900 MHz on the Pi 2 to up to 1.2GHz on the Pi 3.
The second giant upgrade (and this is the one we’re personally most excited about) is the addition of a BCM43143 WiFi chip BUILT-IN to your Raspberry Pi. No more pesky WiFi adapters - this Pi is WiFi ready. There’s also Bluetooth Low Energy (BLE) on board making the Pi an excellent IoT solution (BLE support is still in the works, software-wise)
Lastly, there’s an upgraded switched power source that goes up to 2.5 Amps instead of just 2 Amps - allowing your Pi to power even more powerful devices over USB ports.
The best part about all this is that the Pi 3 keeps the same shape, connectors, and mounting holes as the Pi 2. The only difference is a slight change in where the LEDs are. 99% of cases and accessories will still be fully compatible with the Pi 3, Pi 2, and Pi B + - though if you have a case with a metal top there might be some WiFi chip difficulties.
- A 1.2GHz 64-bit quad-core ARMv8 CPU
- 802.11n Wireless LAN
- Bluetooth 4.0
- Bluetooth Low Energy (BLE)
Like the Pi 2, it also has:
- 4 USB ports
- 40 GPIO pins
- Full HDMI port
- Ethernet port
- Combined 3.5mm audio jack and composite video
- Camera interface (CSI)
- Display interface (DSI)
- Micro SD card slot (now push-pull rather than push-push)
- VideoCore IV 3D graphics core
The Raspberry Pi 3 has an identical form factor to the previous Pi 2 (and Pi 1 Model B+) and has complete compatibility with Raspberry Pi 1 and 2.