808563 RedBearLab - Wi-Fi Micro Kit

RedBearLab - Wi-Fi Micro Kit

The RedBearLab Wi-Fi Micro is made based on CC3200 module by Texas Instruments (TI). The target MCU is TI CC3200, the industry’s first single-chipARM Cortex-M4 core MCU with built-in Wi-Fi connectivity
Categorie
Prezzi IVA inclusa
€ 35,14 Prezzo
€ 28,80 + VAT

Qty
 

Dettagli

The RedBearLab Wi-Fi Micro is made based on CC3200 module by Texas Instruments (TI). The target MCU is TI CC3200, the industry’s first single-chipARM Cortex-M4 core MCU with built-in Wi-Fi connectivity. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. They are offered to make you quickly produce prototypes and demos target for not only Internet of Thing (IoT) but also many other exciting and interesting projects. Such as Wi-Fi camera, Wi-Fi Audio, TFTP Client, TCP/IP OR UDP Server/Client, Http Server, XMPP Client, mDNS, etc.
 
Features:
  • TI CC3200 Dual core MCU: An ARM Cortex-M4 core at 80 MHz for application and a dedicated ARM core for Wi-Fi Network Processing
  • Industry’s first sully certified Wi-Fi module including FCC, IC, CE, ETSI, TELEC, and Wi-Fi Alliance
  • Easy Wi-Fi setup using TI’S Smart Config, Soft AP or WPS2
  • Over the Air (OTA) download application firmware from other Wi-Fi device or Internet
  • A lot of application examples provide by TI
  • TI-RTOS and Free-RTOS supported
  • Wide range of supply voltages and low-power consumption, less than 1uA current in hibernate mode
  • IoT Cloud platform integration ready including 2lemetry, Arrayent, Exosite, IBM, Temboo & Xively
  • You can program our boards with Arduino like syntax using Energia, an open-sourceed version of the Arduino IDE for TI MCU
 
CC3200 Wi-Fi consists of applications microcontroller, Wi-Fi network processor, and power-management subsystems:
 
Applications Microcontroller Subsystem
  • ARM Cortex-M4 Core at 80 MHz
  • 256KB RAM, 1MB serial flash memory with file system for user
  • Hardware Crypto Engine for advanced fast security, including AES, DES, 3DES, SHA2 MD5, CRC and Checksum
  • Up to 27 individually programmable, multiplexed GPIO pins, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and dour-channel ADC
Wi-Fi Network Processor Subsystem
  • Dedicated ARM MCU, completely offloads Wi-Fi and Internet protocols from the applications microcontroller
  • 802.11 b/g/n radio
  • WPA2 personal and enterprise security
  • Station, access point, and Wi-Fi direct modes
  • Powerful crypto engine for fast, secure Wi-Fi and internet connections with 256 bit AES encryption for TLS and SSL connections
  • SmartConfig technology, AP mode and WPS2 for easy and flexible Wi-Fi provisioning
The power-management subsystem includes integrated DC-DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7uA of current.
 
Specification:
 
Microcontroller TI CC3200
Operating Voltage
2.3V to 3.6V
Input Voltage
A: 2.3V - 3.6V 
B: 3.3V - 5.5V (VIN)
Cause: Use either one power source at a time, otherwise you will damage the board.
Clock Speed 80MHz
Connectivity
Wireless LAN (802.11 b/g/n @2.4GHz)
Micro USB (CDC, virtual COM port)
Serial (TX/RX)
I2C
SPI
Parallel Camera
I2S
SD/MMC
Flash Memory 1MB (External Flash in Module)
I/O Pins 27
MK20 USB Board
 
The MK20 (Freescale MK20DX128VFM5) USB board acts as a dongle, it accepts 5V from USB port and regulates to 3.3V via the onboard LDO which can be used to power BLE Nano. It appears on your computer as both a serial port and a removable mass storage disk. Please refer to the guide Getting Started with BLE Nano to learn how to deploy firmware using MK20 USB board.
Since the BLE Nano can work as low as 1.8V, we have designed the MK20 USB board to run at 1.8V as well, simple short the switch S, then the regulator will outputs 1.8V instead. This would allow your BLE Nano to work with 1.8V components.

 
Part List:
  • Wi-Fi Micro x 1
  • MK20 USB Board x 1
 
We have prepared a detail guide Getting Started with RedBearLab Wi-Fi Micro to show you how to upload firmware to Wi-Fi Micro using Energia IDE.
 
For any technical support or suggestion: RedBear Lab Support
 

Specifiche

Part. No. : 114990337

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on RedBearLab - Wi-Fi Micro Kit

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit CC3000 WiFi Shield with Onboard Ceramic Antenna

    511491 Adafruit CC3000 WiFi Shield with Onboard Ceramic Antenna

    Shield WiFi con modulo CC3000, utilizza la porta SPI per comunicare.
    Tasse escluse:
    € 36,99
    IVA inclusa:
    € 45,13
      Confronta
  2. CC3000 WiFi Shield

    712071 CC3000 WiFi Shield

    The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connefalse
    Tasse escluse:
    € 37,19
    IVA inclusa:
    € 45,37
      Confronta
  3. CC3000 WiFi Breakout

    712072 CC3000 WiFi Breakout

    The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connefalse
    Tasse escluse:
    € 34,63
    IVA inclusa:
    € 42,25
      Confronta
  4. Adafruit CC3000 WiFi Breakout with uFL Connector for Ext Antenna

    807967 Adafruit CC3000 WiFi Breakout with uFL Connector for Ext Antenna

    The CC3000 hits that sweet spot of usability, price and capability. It uses SPI for communication (not UART!) so you can pushfalse
    Tasse escluse:
    € 32,36
    IVA inclusa:
    € 39,48
      Confronta
  5. Adafruit CC3000 WiFi Breakout with Onboard Ceramic Antenna

    807968 Adafruit CC3000 WiFi Breakout with Onboard Ceramic Antenna

    The CC3000 hits that sweet spot of usability, price and capability. It uses SPI for communication (not UART!) so you can pushfalse
    Tasse escluse:
    € 32,36
    IVA inclusa:
    € 39,48
      Confronta
  6. RedBearLab - Wi-Fi Micro

    808562 RedBearLab - Wi-Fi Micro

    The RedBearLab Wi-Fi Micro is made based on CC3200 module by Texas Instruments (TI). The target MCU is TI CC3200, the industrfalse
    Tasse escluse:
    € 19,20
    IVA inclusa:
    € 23,42
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!