The provided mounting holes in the GM2/GM8 gear motors are a convenient way to mount these to your project, but sometimes you just need a different way to mount them. These precision laser-cut steel brackets match the features on the gear motor, and securely clamp them down to your project.
Use any #4-sized screw or nut/bolt for assembly, but we use special #4x1/2" screw designed for threading plastic to mount these to our chassis. This screw also does a great job going into the steel bracket!
Note: We've discovered our latest batch of GM2 motors were molded a wee bit fatter around the tab that the motor-retainer screws into. This interferes with the little side-notches when you install it, so you have make the side-notches a wee bit deeper with a file. Or if you're feeling dangerous, you can use a small drill bit and "ride" it down into the notch a bit. Of course this is totally the wrong way to use a drill bit, but sometimes you got to use the tools you have!
|Data Sheet:||Mechanical Drawing|
Questions on Supporto in metallo motori SBGM2
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).