Dettagli
These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision before it really happens. This sensor works by acting as a SPST switch. When the "whisker" bumps into a foreign object it will make contact with a nut next to it, closing the connection and, by default, turning off the motor. By attaching these mechanical bumpers to you robot the whisker will bump something before your robot crashes into it.
The sensor has a 3-pin header which connects directly to the RedBot Mainboard via female to female jumper wires. Use the included RedBot library to make sure your robot never crashes into anything again.
Dimensions: 1.03 x 0.69" (26.27 x 17.67 mm)
Includes:
- 1x Mechanical Bumper Board
- 1x Whisker
- 1x 3/4" 4-40 Nylon Standoff
- 1x 4-40 Hex Nut
- 3x 1/4" 4-40 Phillips Screw
Documents:
Specifiche
Part. No. : | SEN-11999 |
Questions on RedBot Sensor - Mechanical Bumper
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
711769 RedBot Sensor - Line Follower
Sensore Line Follower. Add-on per il robot RedBot, consente al robot di individuare e seguire una linea. -
712097 RedBot Mainboard
The RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardifalse