E-paper might be the most lightweight and comfortable material to read. It reflects light instead of emits light to mimic the experience of conventional paper reading. And in this way much less power is consumed.
Small e-paper shield is a driver shield for e-paper of 2.0 inch and 2.7 inch sizes. It’s capable of displaying texts, graphics and images and supporting more than 170 languages. The upper surface of the shield is flat and clean, which gives great support to the e-paper attached on it.
Note: E-paper panels are not included in this product. You can have a look at 2.7'' e-Paper Panel and 2.0'' e-Paper Panel for selection.
- Wide viewing angle
- Ultra low power consumption
- Stable display quality
- Compatibility: Arduino Uno/Seeeduino v3/Leonardo/Arduino Mega/Linkit ONE
- Operating Voltage: 3.3/5VDC
- Operating Current (refresh screen):40mA
- Interface Type: SPI, I/O
- White Reflectance: above 35%
- Contrast Ratio: above 8:1（t=2minutes）
Please visit our wiki page for more info about this product.
|Part. No. :||104030019|
|Interfaccia :||I/O, SPI|
|Tensione :||3.3, 5|
|Tipo Shield :||Display|
Questions on Small e-paper Shield V2
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).