713154 SparkFun Inventor's Kit (for Arduino Uno) - V3.2

SparkFun Inventor's Kit (for Arduino Uno) - V3.2

The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don’t need any previous programming or electronics experience to use this kit.
Categorie
Prezzi IVA inclusa
€ 103,27 Prezzo
€ 84,65 + VAT

Qty
 

Dettagli

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don’t need any previous programming or electronics experience to use this kit.

The on-line SIK Digital Guide (in the Documents section below) contains step by step instructions of how to connect each circuit with the included parts. Full example code is provided and explained and even includes troubleshooting tips if something goes wrong.

The kit does not require any soldering and is recommended for beginners ages 10 and up. This International version includes the new Simon Says circuit experiment found in the V3.2 SIK with all the LEDs and tactile buttons you will need to complete it, the kit also replaces the SparkFun RedBoard for the tried and true Arduino Uno and removes the SIK Guidebook and carrying case. With these parts being swapped and removed we were able to reduce the overall size and weight of the kit making shipping cheaper and easier for anyone ordering it internationally.

Circuit Examples:

  • Circuit 1: Blinking an LED
  • Circuit 2: Reading a Potentiometer
  • Circuit 3: Driving and RGB LED
  • Circuit 4: Driving Multiple LEDs
  • Circuit 5: Push Buttons
  • Circuit 6: Reading a Photo Resistor
  • Circuit 7: Reading a Temperature Sensor
  • Circuit 8: Driving a Servo Motor
  • Circuit 9: Using a Flex Sensor
  • Circuit 10: Reading a Soft Potentiometer
  • Circuit 11: Using a Buzzer
  • Circuit 12: Driving a Motor
  • Circuit 13: Using Relays
  • Circuit 14: Using a Shift Register
  • Circuit 15: Using an LCD
  • Circuit 16: Simon Says

Kit Includes:

  • Arduino Uno - R3 SMD
  • Arduino and Breadboard Holder
  • White Solderless Breadboard
  • SparkFun Mini Screwdriver
  • 16x2 White on Black LCD (with headers)
  • 74HC595 Shift Register
  • 2N2222 Transistors
  • 1N4148 Diodes
  • DC Motor with Gear
  • Small Servo
  • SPDT 5V Relay
  • TMP36 Temp Sensor
  • Flex sensor
  • Softpot
  • 6' SparkFun USB Cable
  • Jumper Wires
  • Photocell
  • Tri-color LED
  • Red, Blue, Yellow, and Green LEDs
  • Red, Blue, Yellow, and Green Tactile Buttons
  • 10K Trimpot
  • Piezo Speaker
  • Big 12mm Buttons
  • 330 and 10K Resistors

Documents:

Specifiche

Part. No. : KIT-13154

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun Inventor's Kit (for Arduino Uno) - V3.2

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Kit componenti di base 20 in 1

    115003 Kit componenti di base 20 in 1

    Selezione dei componenti elettronici maggiormente utilizzati
    Tasse escluse:
    € 4,04
    IVA inclusa:
    € 4,93
      Confronta
  2. Arduino UNO R3

    500143 Arduino UNO R3

    This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 insteadfalse
    Tasse escluse:
    € 17,30
    IVA inclusa:
    € 21,11
      Confronta
  3. Alimentatore a risparmio energetico 3-12V 600mA

    802431 Alimentatore a risparmio energetico 3-12V 600mA

    Alimentatore stabilizzato da parete a risparmio energetico con tensione selezionabile 3-12V, corrente di uscita 600mA. Fornitfalse
    Tasse escluse:
    € 10,00
    IVA inclusa:
    € 12,20
      Confronta
  4. Alimentatore Switching 9V 600mA

    802434 Alimentatore Switching 9V 600mA

    Alimentatore switching stabilizzato da parete. Tensione di uscita fissa a 9V. Corrente in uscita:600mA
    Tasse escluse:
    € 9,50
    IVA inclusa:
    € 11,59
      Confronta
  5. Arduino UNO SMD Rev3

    802537 Arduino UNO SMD Rev3

    Arduino UNO SMD Rev3 è la versione, in formato SMD di Arduino UNO. Il chip principale è sempre un Atmega328P, ma in formato Sfalse
    Tasse escluse:
    € 16,90
    IVA inclusa:
    € 20,62
      Confronta
  6. Arduino Starter kit - English

    802463 Arduino Starter kit - English

    Include oltre alla scheda Arduino UNO, un libro e un kit componenti. Lo Starter Kit e' pensato per chi vuole iniziare con la false
    Tasse escluse:
    € 74,12
    IVA inclusa:
    € 90,43
      Confronta
  7. SparkFun Inventor's Kit - Carrying Case

    711783 SparkFun Inventor's Kit - Carrying Case

    Contenitore in plastica multiscomparto, lo stesso utilizzato nell'Arduino Inventor's Kit V3
    Tasse escluse:
    € 6,41
    IVA inclusa:
    € 7,82
      Confronta
  8. SparkFun Inventor's Kit - V3.2

    712060 SparkFun Inventor's Kit - V3.2

    The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino prfalse
    Tasse escluse:
    € 76,95
    IVA inclusa:
    € 93,88
      Confronta
  9. SparkFun Mini Inventor's Kit for Redboard

    713160 SparkFun Mini Inventor's Kit for Redboard

    The SparkFun Mini Inventor’s Kit (SMIK) is a great way to get started with programming and hardware interaction with the Ardufalse
    Tasse escluse:
    € 38,48
    IVA inclusa:
    € 46,95
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!