708883 SparkFun Low Current Sensor Breakout - ACS712

SparkFun Low Current Sensor Breakout - ACS712

The ACS712 current sensor measures up to 5A of DC or AC current.
Categorie
Prezzi IVA inclusa
€ 10,96 Prezzo
€ 8,98 + VAT

Qty
 

Dettagli

This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems. The ACS712 current sensor measures up to 5A of DC or AC current. We added an opamp gain stage for more sensitive current measurements. By adjusting the gain (from 4.27 to 47) you can measure very small currents.

The ACS712 Low Current Sensor Breakout outputs an analog voltage that varies linearly with sensed current. To calibrate, first set the output offset to the desired level (with zero current on the sense lines, read output with a DVM). Then with a known current input (a 100mA limited supply works well for this), set the output deflection with the gain pot. Sensitivity is then calculated as (Vref - Vdeflect)/(current input).

The bandwidth on the ACS712 Low Current Sensor Breakout has been set to 34Hz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by removing C1. See schematic for more details.

Documents:

Specifiche

Part. No. : SEN-08883

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun Low Current Sensor Breakout - ACS712

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 2199 - ACS709 Current Sensor Carrier -75 to +75A

    342199 2199 - ACS709 Current Sensor Carrier -75 to +75A

    Sensore di corrente basato sull' ACS709LLFTR della Allegro, con segnale di sovracorrente. Il sensore ha una tensione logica ofalse
    Tasse escluse:
    € 8,11
    IVA inclusa:
    € 9,89
      Confronta
  2. 1187 - ACS714 Current Sensor Carrier -30 to +30A

    341187 1187 - ACS714 Current Sensor Carrier -30 to +30A

    Sensore di corrente basato sull' ACS714 della Allegro. Può misurare fino a 30A e fornisce in uscita una tensione analogica difalse
    Tasse escluse:
    € 6,68
    IVA inclusa:
    € 8,15
      Confronta
  3. 1185 - ACS714 Current Sensor Carrier -5 to +5A

    341185 1185 - ACS714 Current Sensor Carrier -5 to +5A

    Sensore di corrente basato sull' ACS714 della Allegro. Questo sensore è in grado di misurare correnti fino a 5A e fornisce infalse
    Tasse escluse:
    € 7,44
    IVA inclusa:
    € 9,08
      Confronta
  4. INA169 Current Sensor Breakout

    712040 INA169 Current Sensor Breakout

    The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive powerfalse
    Tasse escluse:
    € 6,74
    IVA inclusa:
    € 8,22
      Confronta
  5. LTC4150 Coulomb Counter Breakout

    712052 LTC4150 Coulomb Counter Breakout

    This breakout is capable of constantly monitoring the current your sensor is using, is able to add it up, and will give you afalse
    Tasse escluse:
    € 9,94
    IVA inclusa:
    € 12,13
      Confronta
  6. Breakout Board for MCP4725 I2C DAC

    712918 Breakout Board for MCP4725 I2C DAC

    The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wafalse
    Tasse escluse:
    € 4,28
    IVA inclusa:
    € 5,22
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!