511362 Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -

Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -

Modulo con 5 pads conduttivi dove collegare i punti di contatto. Non e' richiesto un microcontrollore per il funzionamento, il modulo attiva/disattiva le uscite al semplice contatto di uno dei sensori.
Categorie
Prezzi IVA inclusa
€ 8,47 Prezzo
€ 6,94 + VAT

Qty
 

Dettagli

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins. When a capacitive load is detected (e.g. a person touches one of the conductive contacts) the corresponding LED on the right lights up and the output pin goes low. You can use this to update an existing normal-button project where buttons connect to ground when pressed. 

Note that only one contact will be detected at once (this is to protect against having a hand brush against two or more contacts at once. 

Comes with a fully assembled board, and a stick of 0.1" header so you can plug it into a breadboard. For contacts, we suggest using copper foil, then solder a wire that connects from the foil pad to the breakout. 

The datasheet has many details on sensitivity, power usage, etc. - note that this board uses the chip in 'standalone' mode only, it cannot be used in I2C mode.

Specifiche

Part. No. : 1362

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 1129 - Touch sensor

    191129 1129 - Touch sensor

    Sensore capacitivo in grado di rilevare il tocco attraverso plastica, vetro o carta con spessore massimo di 1.2cm. Questo senfalse
    Tasse escluse:
    € 12,03
    IVA inclusa:
    € 14,68
      Confronta
  2. Grove - I2C Touch Sensor

    115107 Grove - I2C Touch Sensor

    Modulo Grove con 4 sensori touch
    Tasse escluse:
    € 16,17
    IVA inclusa:
    € 19,73
      Confronta
  3. Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

    511375 Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

    This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor.
    Tasse escluse:
    € 5,55
    IVA inclusa:
    € 6,77
      Confronta
  4. Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

    511374 Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

    When a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED lights up and the output pin goes high.
    Tasse escluse:
    € 5,55
    IVA inclusa:
    € 6,77
      Confronta
  5. CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

    807653 CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

    Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakofalse
    Tasse escluse:
    € 6,35
    IVA inclusa:
    € 7,75
      Confronta
  6. AT42QT1010 Capacitive Touch Breakout

    712041 AT42QT1010 Capacitive Touch Breakout

    The AT42QT1010 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.
    Tasse escluse:
    € 4,80
    IVA inclusa:
    € 5,86
      Confronta
  7. SparkFun Touch Shield

    712013 SparkFun Touch Shield

    The MPR121QR2 IC is a great way to build simple capacitive touch interfaces, and now it’s even easier to incorporate into youfalse
    Tasse escluse:
    € 11,54
    IVA inclusa:
    € 14,08
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!