511374 Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

When a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED lights up and the output pin goes high.
Categorie
Prezzi IVA inclusa
€ 6,77 Prezzo
€ 5,55 + VAT

 

Dettagli

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor. 

When a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED lights up and the output pin goes high. You can also solder a wire to the middle pad and create your own capacitive pad if the built-in one isn't suited to your project. 

If you want to save power, the LED can be disconnected from the output pin (cut the trace between the jumper marked as such). We designed this breakout to have the more-responsive "fast mode" which draws about 0.5mA. If you need ultra-low (~50uA) power usage, the mode jumper can be cut on one side & soldered closed on the other to fix it into that mode. Check the datasheet for specific power usage measurements. 

Comes with a fully assembled board, and a small stick of 0.1" header so you can solder and plug it into a breadboard. For additional contacts, we suggest using copper foil, then solder a wire that connects from the foil pad to the breakout. 

The datasheet has many details on sensitivity, power usage, etc.

  • Dimensions: 20mm / 0.8" x 29.35mm / 1.15"
  • Weight: 2.03g

Specifiche

Part. No. : 1374

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 1129 - Touch sensor

    191129 1129 - Touch sensor

    Sensore capacitivo in grado di rilevare il tocco attraverso plastica, vetro o carta con spessore massimo di 1.2cm. Questo senfalse
    Tasse escluse:
    € 12,03
    IVA inclusa:
    € 14,68
      Confronta
  2. Grove - I2C Touch Sensor

    115107 Grove - I2C Touch Sensor

    Modulo Grove con 4 sensori touch
    Tasse escluse:
    € 16,17
    IVA inclusa:
    € 19,73
      Confronta
  3. Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -

    511362 Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -

    Modulo con 5 pads conduttivi dove collegare i punti di contatto. Non e' richiesto un microcontrollore per il funzionamento, ifalse
    Tasse escluse:
    € 6,94
    IVA inclusa:
    € 8,47
      Confronta
  4. Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

    511375 Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

    This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor.
    Tasse escluse:
    € 5,55
    IVA inclusa:
    € 6,77
      Confronta
  5. CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

    807653 CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

    Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakofalse
    Tasse escluse:
    € 6,35
    IVA inclusa:
    € 7,75
      Confronta
  6. Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

    807929 Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

    The MPR121 has support for only I2C, which can be implemented with nearly any microcontroller. You can select one of 4 addresfalse
    Tasse escluse:
    € 7,36
    IVA inclusa:
    € 8,98
      Confronta
  7. Adafruit TSL2591 High Dynamic Range Digital Light Sensor

    807932 Adafruit TSL2591 High Dynamic Range Digital Light Sensor

    The TSL2591 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comparefalse
    Tasse escluse:
    € 6,44
    IVA inclusa:
    € 7,86
      Confronta
  8. SparkFun Touch Shield

    712013 SparkFun Touch Shield

    The MPR121QR2 IC is a great way to build simple capacitive touch interfaces, and now it’s even easier to incorporate into youfalse
    Tasse escluse:
    € 11,54
    IVA inclusa:
    € 14,08
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!