Dettagli
This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.
Specifications
- Size: 56.4 mm square × 76 mm, not including the shaft (NEMA 23)
- Weight: 1 kg (35 oz)
- Shaft diameter: 1/4″ (6.35 mm) “D”
- Steps per revolution: 200
- Current rating: 2 A per coil
- Voltage rating: 4.5 V
- Resistance: 2.3 Ohm per coil
- Holding torque: 14 kg-cm (190 oz-in)
- Inductance: 3.6 mH per coil
- Lead length: 12 in
More specifications are available in the datasheet (39k pdf).
Dimensions
Size: | 56.4 mm square × 76 mm1 |
---|---|
NEMA size: | 23 |
Weight: | 1000 g |
Shaft diameter: | 6.35 mm |
General specifications
Shaft type: | 1/4 inch "D" |
---|---|
Steps per revolution: | 200 |
Current rating: | 1000 mA2 |
Voltage rating: | 8.6 V |
Holding torque: | 190 oz·in |
Resistance: | 8.6 Ohm2 |
Inductance per phase: | 14 mH |
Number of leads: | 6 |
Lead length: | 12 in |
Notes:
Stepper Motor Applications
Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:
- Printers
- CNC machines
- 3D printer/prototyping machines
- Laser cutters
- Pick and place machines
- Linear actuators
- Hard drives
Specifiche
Part. No. : | 1475 |
NEMA : | 23 |
WINDING : | Uni/Bi-polar |
Diam. Asse mm : | 6.35 |
Questions on Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 4.5V, 2 A/Phase
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
511009 PoStep 25-32
Driver per motori stepper a 4,6 o 8 fili. Fornisce una corrente massima di 2.5A per fase. Ingressi compatibili con logiche TTfalse -
582133 2133 - DRV8825 Stepper Motor Driver Carrier, High Current
Modulo di controllo per motori passo passo. Gestisce un motore bipolare, fino a 1.5A per fase, fino a 2.2A con dissipatore (nfalse -
711611 AutoDriver - Stepper Motor Controller
Motor Controller per motori Passo Passo bipolari, basato sul chip L6470. Si pilota con protocollo SPIPrezzo di listino:€ 34,25OffertaTasse escluse:€ 23,00IVA inclusa:€ 28,06Prezzo IVA incl.
Confronta -
582510 Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 3.6V, 2 A/Phase
Motore passo passo Unipolare/Bipolare NEMA 23. 2A a 3.6V. 9Kg/cm di coppia.