713288 Teensy Arduino Shield Adapter

Teensy Arduino Shield Adapter

The Teensy Arduino Shield Adapter allows you to attach your Teensy and utilize your favorite Arduino shields without the requirement of a breadboard or any complicated wiring.
Categorie
Prezzi IVA inclusa
€ 14,09 Prezzo
€ 11,55 + VAT

 

Dettagli

The Teensy is an amazing and compact development platform in a breadboard friendly form factor, but what if you could incorporate it into the Arduino architecture? The Teensy Arduino Shield Adapter allows you to attach your Teensy and utilize your favorite Arduino shields without the requirement of a breadboard or any complicated wiring. Needless to say, the Teensy Arduino Shield Adapter is a useful tool for upgrading all of your existing Arduino projects to a more powerful controller!

As we stated before, the Teensy Arduino Shield Adapter provides basic Arduino compatibility with your run-of-the-mill shield but there are a few other fun features that we’ve added on, as well. These features include a Real Time Clock (RTC) battery, a JST battery connector, a 4-12V barrel jack connector, an ICSP header, and more. Because this board is simply an adapter, there is no special programming required to start working with the adapter. You will, however, need to program the Teensy for any Arduino shield you’d like to work with.

While the adapter design can fit the Teensy LC footprint, it has been designed to fully utilize the features of the Teensy 3.1. Not all of the features available on the adapter are compatible with the LC so please be sure to check the Hookup Guide in the Documents section below to ensure functionality for your project.

Note: The Teensy Arduino Shield Adapter comes as a kit and will need to be soldered together.

Features:

  • Arduino R3 Interface
  • Real Time Clock Battery
  • JST Battery Connector
  • Barrel Jack
  • I2C Jumpers
  • ICSP Header
  • DAC Pin Header

Documents:

Specifiche

Part. No. : KIT-13288

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Teensy Arduino Shield Adapter

Sort by Descending
  • 17/10/19 15.02 In order to connect this with TEENSY40 do I need something else(like other headers) and if I do are PRT-13925 compatible?
    • La piedinatura del Teensy 4.0 e' identica ai teensy serie 3.x, ma la designazione di alcuni pin e' differente. Bisogna aiutarsi con gli schemi elettrici e stabilire se le differenze di designazione dei pin possono creare per la propria applicazione. Saluti
    • Do you find this question helpful?  Si   No
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Teensy 3.2 - with Header Pins

    808645 Teensy 3.2 - with Header Pins

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse
    Tasse escluse:
    € 24,75
    IVA inclusa:
    € 30,20
      Confronta
  2. Teensy LC - with Header Pins

    808646 Teensy LC - with Header Pins

    Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cofalse
    Tasse escluse:
    € 20,00
    IVA inclusa:
    € 24,40
      Confronta
  3. Load Cell - 200kg, S-Type (TAS501)

    714282 Load Cell - 200kg, S-Type (TAS501)

    This S-Type load cell (sometimes called a strain gauge) can translate up to 200kg of pressure (force) into an electrical signal.
    Tasse escluse:
    € 63,84
    IVA inclusa:
    € 77,88
      Confronta