808646 Teensy LC - with Header Pins

Teensy LC - with Header Pins

Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 12 bit analog input & output, hardware Serial, SPI & I2C, USB, and a total of 27 I/O pins.
Prezzi IVA inclusa
€ 24,40 Prezzo
€ 20,00 + VAT

 

Dettagli

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of products without breaking the bank!

The Teensy LC comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using Cor you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access and an I2S digital audio interface! There are also 2 separate interval timers! Also, the Teensy LC can provide system voltage of 3.3V or 5V to other devices at up to 5-20mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap it on a breadboard and get to work! So, what sets the Teensy LC apart from the Teensy 3.1? First off, this version has been streamlined to be as cost effective as possible. Obviously, the LC doesn’t share a lot of power that the 3.1 possesses but by no means does it make the LC a ‘weak’ board! The Teensy LC is equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I/O pins with 13 high res Analog inputs.

Note: The Teensy LC does not come with a micro-B USB cable, please check the Recommended Products section below for an appropriate one.

Dimensions: 1.4 x 0.7" (~35 x 18 mm)

Features:

  • 32 bit ARM Cortex-M0+ 48 MHz CPU
  • 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
  • 13 High Resolution Analog Inputs
  • 27 Digital I/O Pins (NOT 5V Tolerant)
  • 10 PWM outputs
  • 7 Timers for intervals/delays, separate from PWM
  • 3 UARTs (serial ports)
  • SPI, I2C, & I2S
  • I2S (for high quality audio interface)
  • 4 Lightweight DMA channels
  • Touch Sensor Inputs

Documents:

Specifiche

Part. No. : TEENSYLC_PINS
Interfaccia : n/a

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Teensy LC - with Header Pins

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Cavo USB 2.0 A Maschio/Micro B Maschio, 100 cm

    310018 Cavo USB 2.0 A Maschio/Micro B Maschio, 100 cm

    Cavo USB 2.0 A Maschio/Micro B Maschio
    Tasse escluse:
    € 2,23
    IVA inclusa:
    € 2,72
      Confronta
  2. Teensy LC

    808421 Teensy LC

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 bringfalse
    Tasse escluse:
    € 12,30
    IVA inclusa:
    € 15,01
      Confronta
  3. Teensy 3.2

    808443 Teensy 3.2

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse
    Tasse escluse:
    € 20,66
    IVA inclusa:
    € 25,21
      Confronta
  4. Teensy 3.2 - with Header Pins

    808645 Teensy 3.2 - with Header Pins

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse
    Tasse escluse:
    € 24,75
    IVA inclusa:
    € 30,20
      Confronta
  5. Prop Shield With Motion Sensors

    808647 Prop Shield With Motion Sensors

    This shield features 10DOF motion sensors, 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flfalse
    Tasse escluse:
    € 20,41
    IVA inclusa:
    € 24,90
      Confronta
  6. Prop Shield, Low Cost (no Motion Sensors)

    808648 Prop Shield, Low Cost (no Motion Sensors)

    This shield features a 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flash memory for imagefalse
    Tasse escluse:
    € 8,90
    IVA inclusa:
    € 10,86
      Confronta
  7. WIZ820io & Micro SD Card Adaptor

    808744 WIZ820io & Micro SD Card Adaptor

    This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io ethernet module with Teensy false
    Tasse escluse:
    € 6,90
    IVA inclusa:
    € 8,42
      Confronta
  8. Teensy Arduino Shield Adapter

    715716 Teensy Arduino Shield Adapter

    Scheda per Teensy 3.x. Consente di utilizzare gli shield Arduino sulla piattaforma Teensy
    Tasse escluse:
    € 12,00
    IVA inclusa:
    € 14,64
      Confronta