807965 USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USBSerial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port.
Categorie
Prezzi IVA inclusa
€ 13,12 Prezzo
€ 10,75 + VAT

 

Dettagli

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.

Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX/TX link. Then install the Windows XP/Vista/7 or MacOS X PL2303HX drivers on your computer and connect with a terminal program at 115200 baud. Windows 8 is now supported! If you're using Windows 7 and you have issues, try this Prolific driver version 1.013

Also handy for hacking WiFi routers to install alternate OS's, or nearly any other TTL port. This is easier to use than an FTDI cable in many cases because the wires are separated

This cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc. because it does not have the DTR/RTS wire necessary for initiating the bootloader reboot sequence. For that we suggest an FTDI cable or FTDI friend.

There are four wires: red power, black ground, white RX into USB port, and green TX out of the USB port.
The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.

Revision History

  • Prior to July 1 2014 this cable would come with a PL2303HX chipset and a black USB body. After July 1, 2014 we changed to a violet body and the PL2303TA chipset. The new 'TA cables are Win8 compatible, and are more reliable especially when dealing with random USB-disconnects.

Tutorials:

 

Adafruit's Raspberry Pi Lesson 5. Using a Console Cable Learn how to Connect to your Raspberry Pi with a Console Cable

Adafruit Ultimate GPS on the Raspberry Pi Adding GPS tracking to your Pi-based projects

 

Specifiche

Part. No. : 954

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. USB-SERIAL-CABLE USB serial console cable

    500181 USB-SERIAL-CABLE USB serial console cable

    USB-SERIAL-CABLE USB serial console cable
    Tasse escluse:
    € 5,65
    IVA inclusa:
    € 6,89
      Confronta
  2. USB Console Adapter for Intel Galileo

    807754 USB Console Adapter for Intel Galileo

    The Intel Galileo Development Board has a serial console port to access the boot-loader and Linux prompt. However, it is not false
    Tasse escluse:
    € 21,86
    IVA inclusa:
    € 26,67
      Confronta
  3. Raspberry Pi Model B+ 512MB RAM

    807883 Raspberry Pi Model B+ 512MB RAM

    Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse
    Tasse escluse:
    € 30,30
    IVA inclusa:
    € 36,97
      Confronta
  4. USB to TTL Serial Cable

    712977 USB to TTL Serial Cable

    This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of thisfalse
    Tasse escluse:
    € 10,85
    IVA inclusa:
    € 13,24
      Confronta
  5. Raspberry Pi B+ - GPIO Ribbon Cable (40-pin, 6")

    713028 Raspberry Pi B+ - GPIO Ribbon Cable (40-pin, 6")

    This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherafalse
    Tasse escluse:
    € 3,51
    IVA inclusa:
    € 4,28
      Confronta
  6. FTDI Serial TTL-232 USB Cable

    808520 FTDI Serial TTL-232 USB Cable

    This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the endfalse
    Tasse escluse:
    € 16,82
    IVA inclusa:
    € 20,52
      Confronta