709868 Breakout Board for ADMP401 MEMS Microphone

Breakout Board for ADMP401 MEMS Microphone

Scheda con microfono MEMS ADMP401
Categorie
Prezzi IVA inclusa
€ 13,30 Prezzo
€ 10,90 + VAT

Qty
 

Dettagli

This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom ported input. This means the microphone's input can fit flush against the enclosure of your project. Plus you will not have to deal with trying to solder the microphone's wacky footprint. Wootness!

The amplifier on the breakout has a gain of 67 and more than meets the bandwidth requirements of the mic. The amplifier's AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arms length and is being talked into at normal conversational volume levels. So the AUD output can easily be connected to the ADC of a micro.

Features:

  • -3dB roll off at 100Hz and 15kHz
  • 1.5 to 3.3VDC supply voltage
  • Should comfortably output 40mW
  • SNR of -62dBA

Documents:

 

Specifiche

Part. No. : BOB-09868

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Breakout Board for ADMP401 MEMS Microphone

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. SparkFun Electret Microphone Breakout

    712758 SparkFun Electret Microphone Breakout

    Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to afalse
    Tasse escluse:
    € 6,54
    IVA inclusa:
    € 7,98
      Confronta