| 500057 |
PIC-GSM DEVELOPMENT BOARD WITH GSM MODULE AND PIC18F67J50 MICROC |
|
|
|
 |
| Product Specifications |
|
This board purpose is to enable the development of remote control application.
With it you can easyly monitor and control your home from everywhere with your
GSM cell phone. You can switch on and off relays remotely by SMS. You can monitor
the status of your GPIOs or toggle them. You can establish call to the GSM module
and speak or listen on the audio channel of the board. You can monitor the temperature
from several digital remote temperature sensors. The build-in GSM module have
on-board antenna and allow you to use it as GSM or GPRS allowing you to use
this module as GPRS modem connected to your computer too. Panic button and alarm
inputs can dial your phone and report for alarm or to send you SMS message.
FEATURES:
- ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-PG1,PIC-PG2,
PIC-PG3 or PIC-PG4 and programming and debuggine with PIC-ICD2, PIC-ICD2-POCKET,
PIC-ICD2-TINY
- USB 2.0 type B connector allow board to be interfaced to PC host.
- GSM/GPRS module 900/1800/1900Mhz
- Li-ion backup battery
- PIC18F97J60-I/PT
- GSM Audio In and Out
- RS232 connector
- Quartz crystall 20Mhz
- two relays 10A/250VAC
- two digital inputs
- analog input
- temperature sensor
- 5V voltage regulator
- EXT connector for available GPIO
- Four mounting holes 3,3 mm (0,13")
- FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- Dimensions 100x80 mm (3,9x3,15")
DOCUMENTS:
HARDWARE:
SOFTWARE:
- PIC-GSM open
source remote control software
|
|
|
|
|
 |
Customers who bought this product also purchased |
 |
|
|
| |
|
