The PhidgetInterfaceKit 0/16/16 provides:
- 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC
- 16 Digital Outputs controlling up to 30VDC
- LED indicators on all I/O channels
The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.
The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.
Comes packaged with a 180cm USB Cable, a Getting Started Manual, a mounting hardware kit, and a sheet of labels.
For more information see:
Use spaces to separate tags. Use single quotes (') for phrases.
Questions on 1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub
No questions asked yetRegister or Login to ask a question.
- Teensy (Arduino)
- Grove (Arduino)
- Raspberry PI
- Sockets, Strips & Jumpers
- Embedded Linux
- Voice and Sound
- Radio & Wireless
- Display & LED
- Robot Kits
- Mechanics and Materials
- DYNAMIXEL Servos
- Stepper Motors
- Motor & Servo Controllers
- Garage Sale
USB-RLY08C USB-RLY08-C - 8 channel USB relayExcl. Tax:€44.36Incl. Tax:€54.12
Excl. Tax:€2.20Incl. Tax:€2.68
Excl. Tax:€29.90Incl. Tax:€36.48
Excl. Tax:€3.00Incl. Tax:€3.66
You have no items to compare.