Details
The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. SensorValue varies from 0 to1000 over the 60mm travel of the slider. The maximum resistance is 10K ohms.
The 1112 can be used as human input or as position feedback in a system.
The sensor is ratiometric,
Comes packaged with a 60cm Sensor Cable.
Previous versions of the manual:
This sensor connects to an Analog Input on the 1018 PhidgetInterfaceKit 8/8/8 or on the 1202 or 1203 PhidgetTextLCDs.
Related Products
-
709119 Slide potentiometer 10KOhms
A simple slide potentiometer can go a long way. Rated at 10kOhm and 0.5W. Comes withe solder lug connections. -
710976 Slide Pot - Motorized (10k Linear Taper)
Slide Pot - Motorized (10k Linear Taper) -
711620 Slide Pot - Small (10K Linear Taper)
A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W -
709120 Slide Potentiometer Knob
This is the knob that connects to the linear slide potentiometer. Knob has a nice friction fit onto slide. -
711621 Slide Pot - Medium (10K Linear Taper)
A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W
|
ETH484-B - ETH484-B - 4 x 16A ethernet relay 
Excl. Tax:
€69.50
Incl. Tax:
€84.79
|
|
Raspberry Pi 4 Model B board with 4GB LPDDR4 SDRAM 
Excl. Tax:
€59.70
Incl. Tax:
€72.83
|
You have no items to compare.
-
-
-
-
3108 - TPK-03 Immersion Probe K-type Thermocouple (-50 to +700°C)
Excl. Tax:€37.22Incl. Tax:€45.41Out of stock
