This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in). The motor has four color-coded wires terminated with bare leads.
Our 5mm universal mounting hub (see related products) can be used to mount objects on the stepper motor’s 5mm-diameter output shaft.
- Size: 35 mm square x 26 mm, not including the shaft (NEMA 14)
- Weight: 130 g (4.5 oz)
- Shaft diameter: 5 mm
- Steps per revolution: 200
- Current rating: 280 mA per coil
- Voltage rating: 7.4 V
- Resistance: 26 Ohm per coil
- Holding torque: 650 g-cm (9 oz-in)
- Inductance: 19.2 mH per coil
- Lead length: 12 in
The following diagram shows the stepper motor dimensions in mm. The dimension labeled “length” is 26 mm. The output shaft has a length of 21 mm and a diameter of 5 mm.
|Part. No. :||1207|
|Shaft Diam. mm :||5|
Questions on 1207 - Stepper Motor: Bipolar, 200 Steps/Rev, 35x26mm, 7.4V, 280
No questions asked yetRegister or Login to ask a question.
Excl. Tax:€7.53Incl. Tax:€9.19
Excl. Tax:€5.67Incl. Tax:€6.92
Excl. Tax:€6.18Incl. Tax:€7.54
Excl. Tax:€2.70Incl. Tax:€3.29