804311 2.0" 320x240 Color IPS TFT Display with microSD Card Breakout

2.0" 320x240 Color IPS TFT Display with microSD Card Breakout

Display IPS da 2" con una risoluzione di 320x240 pixel. Un vero display TFT dai colori vividi, include un socket per card microSD e un convertitore di livelli, utilizzabile a 3.3V e 5V. Interfaccia SPI, disponibile libreria.
Categories
Prices are VAT included
€27.33 Price
€22.40 + VAT

 

Details

This gorgeous IPS display breakout is the best way to add a small, colorful and bright display to any project, with excellent visibility from any angle. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 2.0" display has 320x240 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! Not only that, but its an IPS display for vivid color and high-angle visibility. The TFT driver (ST7789) can display full 18-bit color (262,144 shades), but almost all drivers will use just 16-bit color. The TFT will always come with the same driver chip so there's no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator, auto-reset circuitry, and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included,

 
Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code. The code is written for Arduino but can be easily ported to your favorite microcontroller! Wiring is easy, we strongly encourage using the hardware SPI pins of your Arduino as software SPI is noticeably slower when dealing with this size display.

Product Dimensions: 59.2mm x 35.5mm x 3.7mm / 2.3" x 1.4" x 0.1"

Product Weight: 13.5g / 0.5oz

Specifications

Part. No. : 4311
Shield Type : Display
Interface : SPI

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 2.0" 320x240 Color IPS TFT Display with microSD Card Breakout

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. MOD-NOKIA6610 TFT LCD 128x128 PIXEL, 12-BIT COLOR WITH BACKLIGHT

    390023 MOD-NOKIA6610 TFT LCD 128x128 PIXEL, 12-BIT COLOR WITH BACKLIGHT

    MOD-NOKIA6610 is development board with UEXT universal connector and can be attached and add LCD functionality to all other dfalse
    Regular Price:
    €32.51
    Special
    Excl. Tax:
    €14.00
    Incl. Tax:
    €17.08
      Compare
  2. 1.8" 18-bit color TFT LCD display with microSD card breakout - ST7735R

    807652 1.8" 18-bit color TFT LCD display with microSD card breakout - ST7735R

    The 1.8" display has 128x160 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which arfalse
    Excl. Tax:
    €21.30
    Incl. Tax:
    €25.99
      Compare
  3. Adafruit 0.96" 160x80 Color TFT Display w/ MicroSD Card Breakout - ST7735

    809009 Adafruit 0.96" 160x80 Color TFT Display w/ MicroSD Card Breakout - ST7735

    Say hello to our 0.96" 160x80 Color TFT Display w/ MicroSD Card Breakout – we think it's T-F-Terrific! It's the size of false
    Excl. Tax:
    €21.30
    Incl. Tax:
    €25.99
      Compare

Price Match



* Required Fields