342377 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extended motor shaft.
Categories
Prices are VAT included
€18.06 Price
€14.80 + VAT

Qty
 

Details

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extended motor shaft.

Key specs at 6 V: 2200 RPM and 40 mA free-run, 3 oz-in (0.2 kg-cm) and 0.7 A stall.

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and offer a choice between three different motors: high-power (HP), medium-power (MP), and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application. A more basic comparison table is available below.

Some versions of the gearmotors are sold with an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add an encoder, such as our magnetic encoder for micro metal gearmotors, to provide motor speed or position feedback.

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). The gearmotor weighs approximately 0.35 oz (10 g). Versions with the extended motor shaft have a 1mm diameter round shaft that protrudes 4.5 mm from the rear of the motor, between the two motor terminals; this is not pictured in the above dimension diagram. In terms of size, these gearmotors are very similar to Sanyo’s popular 12 mm NA4S DC gearmotors, and gearmotors with this form factor are often referred to as N20 motors.

Dimensions

Size: 24 x 10 x 12 mm
Weight: 0.34 oz
Shaft diameter: 3 mm

General specifications

Gear ratio: 9.96:1
Free-run speed @ 6V: 2200 rpm
Free-run current @ 6V: 40 mA
Stall current @ 6V: 700 mA
Stall torque @ 6V: 3 oz·in
Extended motor shaft?: Y

Specifications

Part. No. : 2377
Shaft Diam. mm : 3

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Pololu Micro Metal Gearmotor Bracket Pair - Black

    270027 Pololu Micro Metal Gearmotor Bracket Pair - Black

    This compact bracket enables convenient mounting of popular, Sanyo-style miniature metal gearmotors.
    Excl. Tax:
    €4.53
    Incl. Tax:
    €5.53
      Compare
  2. 1099 - Pololu 10:1 Micro Metal Gearmotor

    341099 1099 - Pololu 10:1 Micro Metal Gearmotor

    This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 10:1 metal gearboxfalse
    Excl. Tax:
    €19.00
    Incl. Tax:
    €23.18
      Compare
  3. 2381 - 100:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    342381 2381 - 100:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 100.37:1 metal gearbox, similar tofalse
    Excl. Tax:
    €20.00
    Incl. Tax:
    €24.40
      Compare
  4. 2380 - 75:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    342380 2380 - 75:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 75.81:1 metal gearbox, similar to false
    Excl. Tax:
    €20.00
    Incl. Tax:
    €24.40
      Compare
  5. 3080 - 1000:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343080 3080 - 1000:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making false
    Excl. Tax:
    €21.14
    Incl. Tax:
    €25.79
      Compare
  6. 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343079 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has false
    Excl. Tax:
    €21.00
    Incl. Tax:
    €25.62
      Compare
  7. 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343074 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has afalse
    Excl. Tax:
    €22.00
    Incl. Tax:
    €26.84
      Compare
  8. 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343076 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has false
    Excl. Tax:
    €22.00
    Incl. Tax:
    €26.84
      Compare
  9. 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343072 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has afalse
    Excl. Tax:
    €23.00
    Incl. Tax:
    €28.06
      Compare
  10. 2370 - 250:1 Micro Metal Gearmotor MP 6V

    342370 2370 - 250:1 Micro Metal Gearmotor MP 6V

    This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 false
    Excl. Tax:
    €19.00
    Incl. Tax:
    €23.18
      Compare
  11. 2369 - 210:1 Micro Metal Gearmotor MP 6V

    342369 2369 - 210:1 Micro Metal Gearmotor MP 6V

    This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 false
    Excl. Tax:
    €19.00
    Incl. Tax:
    €23.18
      Compare
  12. 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    344797 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    Micromotoriduttore con ingranaggi in metallo, versione HPCB a 6v con asse per encoder. Dotato di spazzole long-life
    Excl. Tax:
    €15.50
    Incl. Tax:
    €18.91
      Compare