342997 2997 - TB9051FTG Single Brushed DC Motor Driver Carrier

2997 - TB9051FTG Single Brushed DC Motor Driver Carrier

Controller con chip Toshiba TB9051FTG, per controllo motori CC. Ampio range di tensione e 2.6A di potenza. Protezioni varie sui picchi di corrente, sovratensione, sotto tensione, etc.
Categories
Prices are VAT included
€13.42 Price
€11.00 + VAT

 

Details

This breakout board makes it easy to use Toshiba’s TB9051FTG brushed DC motor driver. It has a wide operating voltage range of 4.5 V to 28 V and can deliver a continuous 2.6 A. A fixed current chopping threshold allows the TB9051 to limit the peak motor current, and it features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection.


The TB9051FTG from Toshiba is an H-bridge motor driver IC that can be used for bidirectional control of a single brushed DC motor at 4.5 V to 28 V. It can supply up to about 2.6 A continuously, and it can deliver peak currents up to 5 A (typical) for a few seconds. The TB9051FTG is a great IC, but its small surface-mount package makes it difficult for the typical student or hobbyist to use; our breakout board makes it easy to use with standard solderless breadboards and 0.1″ perfboards. The board ships populated with SMD components, including the TB9051FTG and a reverse battery protection circuit.

Features

  • Single-channel H-bridge motor driver
  • Motor supply voltage: 4.5 V to 28 V
  • Output current: up to 2.6 A continuous (5 A peak)
  • Automatic current chopping feature helps prevent overheating by gracefully reducing power rather than abruptly shutting down
  • Under-voltage lockout and protection against over-current/short-circuit and over-temperature
  • Carrier board adds reverse-voltage protection
  • Active-low error output indicates over-current, over-temperature, under-voltage, or VCC over-voltage condition
  • Compact size (1.0″ × 1.0″)
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB

Dimensions

Size: 1.0" × 1.0″1
Weight: 3.1 g1

General specifications

Motor driver: TB9051FTG
Motor channels: 1
Minimum operating voltage: 4.5 V2
Maximum operating voltage: 28 V3
Peak output current per channel: 5 A
Continuous output current: 2.6 A
Current sense: 0.5 V/A
Maximum PWM frequency: 20 kHz
Reverse voltage protection?: Y

Identifying markings

PCB dev codes: md36a
Other PCB markings: 0J11154

Notes:

1 Without included hardware.
2 Operation from 4.5 V to 8 V reduces maximum current output.
3 The device is protected for transients up to 40 V.

 

Included hardware

This product ships with all surface-mount components—including the TB9051FTG driver IC—installed as shown in the product picture. However, soldering is required for assembly of the included through-hole parts: one 1×17-pin breakaway 0.1″ male header and two 2-pin, 3.5 mm terminal blocks (for board power and motor outputs).

Product page

Specifications

Part. No. : 2997

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 2997 - TB9051FTG Single Brushed DC Motor Driver Carrier

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. 2992 - Pololu G2 High-Power Motor Driver 24v13

    342992 2992 - Pololu G2 High-Power Motor Driver 24v13

    This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ ×false
    Excl. Tax:
    €25.96
    Incl. Tax:
    €31.67
      Compare
  2. 2994 - Pololu G2 High-Power Motor Driver 18v25

    342994 2994 - Pololu G2 High-Power Motor Driver 18v25

    This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ ×false
    Excl. Tax:
    €32.40
    Incl. Tax:
    €39.53
      Compare
  3. 2999 - TB67H420FTG Dual/Single Motor Driver Carrier

    342999 2999 - TB67H420FTG Dual/Single Motor Driver Carrier

    Controller con chip Toshiba TB67H420FTG, per controllo motori CC. Puo' operare in dual-channel oppure in single-channel raddofalse
    Excl. Tax:
    €15.00
    Incl. Tax:
    €18.30
      Compare