2x DC Motor Phidget
Tutti i prezzi sono IVA inclusa
If you're looking for a compact solution for controlling a medium-sized stepper motor, the STC1003 is an affordable and convenient option. You can control the position, velocity, and acceleration of the motor by sending commands from your program. This Phidget connects to a VINT Hub; for a list of options see the Connection & Compatibility tab.
Safety Features
The STC1003 comes equipped with a heatsink to prevent the board from overheating during use. The power terminals on this device are polarity protected: if you happen to hook up the power supply backwards, the device simply won't power up and won't be damaged. A 5-amp automotive-style fuse is also included to protect the board from current spikes from the motor's back-EMF. This Phidget is isolated from input to output, so your VINT hub and computer will be protected if anything goes wrong.
Power Saving Options
For power-conscious users, we also allow for separate control over the current limit and the holding current limit. If you know your motor will be stationary for long periods of time, but still needs a small amount of holding torque to maintain its position, you can set the holding current appropriately without interfering with the running current limit.
Product Specifications
| Board Properties | |
|---|---|
| Controlled By | VINT |
| Controller Properties | |
| Motor Type | Bipolar Stepper |
| Number of Motor Ports | 1 |
| Motor Position Resolution | 1/16 Step (40-Bit Signed) |
| Position Max | ± 1E+15 1/16 steps |
| Stepper Velocity Resolution | 1 1/16 steps/sec |
| Stepper Velocity Max | 115000 1/16 steps/sec |
| Stepper Acceleration Resolution | 1 1/16 steps/sec² |
| Stepper Acceleration Min | 2 1/16 steps/sec² |
| Stepper Acceleration Max | 1E+07 1/16 steps/sec² |
| Sampling Interval Min | 100 ms/sample |
| Sampling Interval Max | 60 s/sample |
| Electrical Properties | |
| Available Current per Coil Max | 4 A |
| Supply Voltage Min | 10 V DC |
| Supply Voltage Max | 30 V DC |
| Current Consumption Min (VINT Port) | 500 μA |
| Current Consumption Max (VINT Port) | 1 mA |
| Quiescent Power Consumption Max | 200 mW |
| Physical Properties | |
| Recommended Wire Size | 16 - 26 AWG |
| Operating Temperature Min | -20 °C |
| Operating Temperature Max | 85 °C |