343147 3147 - Jrk G2 24v13 USB Motor Controller with Feedback

3147 - Jrk G2 24v13 USB Motor Controller with Feedback

The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces
Categories
Prices are VAT included
€134.20 Price
€110.00 + VAT

 

Details

This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output currents up to 13 A without a heat sink.

With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers makes it easy to add closed-loop control of speed or position (but not both!) of a single brushed DC motor to a variety of projects. These versatile, general-purpose modules support five different control interfaces: USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, and analog voltages for use with a potentiometer or analog joystick. They also offer many settings that can be configured using our free configuration software utility for Windows, Linux, and macOS. This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Jrk G2 to a computer).

Main features of the Jrk G2 family

  • Easy open-loop or closed-loop control of one brushed DC motor
  • A variety of control interfaces:
    • USB for direct connection to a computer
    • TTL serial operating at 5 V for use with a microcontroller
    • I²C for use with a microcontroller
    • RC hobby servo pulses for use in an RC system
    • Analog voltage for use with a potentiometer or analog joystick
  • Feedback options:
    • Analog voltage (0 V to 5 V), for making a closed-loop servo system
    • Frequency, for closed-loop speed control using pulse counting (for higher-frequency feedback) or pulse timing (for lower-frequency feedback)
    • None, for open-loop speed control
    • Note: the Jrk does not support using quadrature encoders for position control
  • Ultrasonic 20 kHz PWM for quieter operation (can be configured to use 5 kHz instead)
  • Simple configuration and calibration over USB with free configuration software utility (for Windows, Linux, and macOS)
  • Configurable parameters include:
    • PID period and PID coefficients (feedback tuning parameters)
    • Maximum current
    • Maximum duty cycle
    • Maximum acceleration and deceleration
    • Error response
    • Input calibration (learning) for analog and RC control
  • Optional CRC error detection eliminates communication errors caused by noise or software faults
  • Reversed-power protection
  • Field-upgradeable firmware
  • Optional feedback potentiometer disconnect detection

Details for item #3147

The Jrk G2 24v13 operates from 6.5 V to 40 V and can deliver a continuous output current of 13 A without a heat sink. Note that 40 V is the absolute maximum for this controller; the maximum recommended operating voltage is 34 V, and the maximum recommended nominal battery voltage is 28 V.

If you need to identify which version you have, you can just plug it into a computer through USB and the Jrk software will tell you. For quick visual identification without a computer, you can distinguish this version from the identically sized Jrk G2 18v19 by the number 100 on top of the tall silver electrolytic capacitors.

Dimensions

Size: 1.2″ × 1.4″ × 0.42″1
Weight: 6.5 g1

General specifications

Motor channels: 1
Control interface: USB; non-inverted TTL serial; I²C;
RC servo pulses; analog voltage
Minimum operating voltage: 6.5 V
Maximum operating voltage: 40 V2
Continuous output current per channel: 13 A3
Maximum PWM frequency: 20 kHz
Reverse voltage protection?: Y
Version: G2 24v13 (40 V max, 13 A max continuous)

Identifying markings

PCB dev codes: umc05a
Other PCB markings: 0J11042, blank white box

Notes:

1 Without included hardware.
2 Absolute maximum; higher voltages can permanently destroy the motor driver. Recommended maximum is approximately 34 V, which leaves a safety margin for ripple voltage on the supply line.
3 Typical results at room temperature with both channels running at 90% duty cycle.

 

Included hardware

The Jrk ships with a 0.1″ breakaway male header strip and two 2-pin 5mm terminal blocks. You can solder the terminal blocks to the four large through-holes to make your motor and motor power connections, or you can solder an 8-pin piece of the 0.1″ header strip into the smaller through-holes that border these larger holes. Note, however, that the terminal blocks are only rated for 16 A, and each header pin pair is only rated for a combined 6 A, so for higher-power applications, thick wires should be soldered directly to the board.

Product page

Specifications

Part. No. : 3147

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 3147 - Jrk G2 24v13 USB Motor Controller with Feedback

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Sabertooth 2X12 Motor Controller 2X12A

    330019 Sabertooth 2X12 Motor Controller 2X12A

    The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market.
    Excl. Tax:
    €62.30
    Incl. Tax:
    €76.01
      Compare
  2. 1394 - Pololu Jrk 21v3 USB Motor Controller with Feedback (Assem

    341394 1394 - Pololu Jrk 21v3 USB Motor Controller with Feedback (Assem

    The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, lfalse
    Excl. Tax:
    €44.85
    Incl. Tax:
    €54.72
      Compare
  3. 3149 - Jrk G2 24v21 USB Motor Controller with Feedback

    343149 3149 - Jrk G2 24v21 USB Motor Controller with Feedback

    The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalse
    Excl. Tax:
    €142.00
    Incl. Tax:
    €173.24
      Compare
  4. 3148 - Jrk G2 18v27 USB Motor Controller with Feedback

    343148 3148 - Jrk G2 18v27 USB Motor Controller with Feedback

    The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalse
    Excl. Tax:
    €155.00
    Incl. Tax:
    €189.10
      Compare
  5. 3146 - Jrk G2 18v19 USB Motor Controller with Feedback

    343146 3146 - Jrk G2 18v19 USB Motor Controller with Feedback

    The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalse
    Excl. Tax:
    €120.00
    Incl. Tax:
    €146.40
      Compare
  6. 1366 - High-Power Simple Motor Controller G2 18v25

    341366 1366 - High-Power Simple Motor Controller G2 18v25

    The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalse
    Excl. Tax:
    €45.10
    Incl. Tax:
    €55.02
      Compare
  7. 1365 - High-Power Simple Motor Controller G2 24v12

    341365 1365 - High-Power Simple Motor Controller G2 24v12

    The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuratifalse
    Excl. Tax:
    €139.00
    Incl. Tax:
    €169.58
      Compare
  8. 2995 - Pololu G2 High-Power Motor Driver 24v21

    342995 2995 - Pololu G2 High-Power Motor Driver 24v21

    Ponte H a componenti discreti Mosfet, per il controllo bidirezionale di un motore DC ad alta potenza. Protezione, current senfalse
    Excl. Tax:
    €32.40
    Incl. Tax:
    €39.53
      Compare
  9. 1367 - High-Power Simple Motor Controller G2 24v19

    341367 1367 - High-Power Simple Motor Controller G2 24v19

    Potente motor controller, controlla un motore DC, utilizzo molto semplice, 5 interfacce (usb, ttl, I2C, analogico, servo RC).
    Excl. Tax:
    €45.10
    Incl. Tax:
    €55.02
      Compare
  10. 1363 - High-Power Simple Motor Controller G2 18v15

    341363 1363 - High-Power Simple Motor Controller G2 18v15

    Potente motor controller, controlla un motore DC, utilizzo molto semplice, 5 interfacce (usb, ttl, I2C, analogico, servo RC).
    Excl. Tax:
    €100.00
    Incl. Tax:
    €122.00
      Compare