This NEMA-17 motor generates 3.6 Kg-cm of holding torque at 1.7 Amps. It comes with the rear shaft exposed, so you can mount anencoder or shaft coupler.
When connected to a 1067 - PhidgetStepper Bipolar HC, the 3324 has a maximum speed of 4130 RPM.
The 3324 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.
The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.
Note: Make sure to unplug the power cord from the motor controller before switching wires around.
The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.
|Motor Type||Bipolar Stepper|
|Manufacturer Part Number||42STH38-1684B|
|Step Accuracy||± 5 %|
|Holding Torque||3.6 kg·cm|
|Rated Torque||3.3 kg·cm|
|Maximum Speed (w/1067 Motor Controller)||4130 RPM|
|Acceleration at Max Speed
(w/1067 Motor Controller)
|1E+06 1/16 steps/sec²|
|Recommended Voltage||12 V DC|
|Rated Current||1.7 A|
|Coil Resistance||1.7 Ω|
|Shaft Diameter||5 mm|
|Rear Shaft Diameter||3.9 mm|
|Mounting Plate Size||NEMA - 17|
|Number of Leads||4|
|Wire Length||300 mm|
Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.
|Part. No. :||3324|
|Shaft Diam. mm :||5|
Questions on 3324 - 42STH38 NEMA-17 Bipolar Gearless Stepper
No questions asked yetRegister or Login to ask a question.
193531 3531 - Optical Rotary Encoder HKT22This low-cost encoder is designed to fit on the rear shaft of our stepper motors. Measure the rotation of your motor even whefalseExcl. Tax:€31.02Incl. Tax:€37.84
193320 3320 - 28STH32 NEMA-11 Bipolar Gearless Stepper MotorThis tiny stepper with a rear shaft has a 1.8° step angle and 520 g·cm of torque at low speeds.Excl. Tax:€20.43Incl. Tax:€24.92
193338 3338 - Stepper Mounting Bracket (NEMA 17)Fix a NEMA-17 sized motor or 36mm gearbox to a flat surface with this steel mounting bracket.Excl. Tax:€4.79Incl. Tax:€5.84
342267 2267 - Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/PhaseMotore passo passo bipolare, nema 17Excl. Tax:€26.90Incl. Tax:€32.82