193326 3326_0 - 42STH38 NEMA-17 Bipolar Stepper with 14:1 Gearbox

3326_0 - 42STH38 NEMA-17 Bipolar Stepper with 14:1 Gearbox

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.13° step angle and 30 kg·cm of torque at low speeds.
Categories
Prices are VAT included
€65.37 Price
€53.58 + VAT

 

Details

This NEMA-17 motor has an integrated Planetary gearbox with a 13212/289 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

When connected to a 1067 - PhidgetStepper Bipolar HC, the 3326 has a maximum speed of 295 RPM. At the output of the gearbox, the step angle is approximately 0.13°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.

At 1.7 Amps, this stepper motor can produce a maximum torque of 49 kg-cm. However, the gearbox is only rated for 30 kg-cm of continuous torque. Loading this gearbox stepper beyond the torque rating of the gearbox will shorten its useful life.

The 3326 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.

The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

 

Wire Color Black Green Red Blue
Board Connector A B C D

Note: Make sure to unplug the power cord from the motor controller before switching wires around.


The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.

Motor Properties

Motor Type Bipolar Stepper
Manufacturer Part Number 42STH38-1684B / 36JXS60K14
Step Angle 0.13°
Step Accuracy ± 5 %
Holding Torque 30 kg·cm
Rated Torque 30 kg·cm
Maximum Speed (w/1067 Motor Controller) 295 RPM
Acceleration at Max Speed 
(w/1067 Motor Controller)
1E+06 1/16 steps/sec²

 

Electrical Properties

Recommended Voltage 12 V DC
Rated Current 1.7 A
Coil Resistance 1.7 Ω

 

Physical Properties

Shaft Diameter 8 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 17
Weight 502 g
Number of Leads 4
Wire Length 300 mm

 

Gearbox Properties

Gearbox Type Planetary
Gear Ratio 13 212289 : 1
Backlash Error 12°
Maximum Strength of Gears 30 kg·cm
Shaft Maximum Axial Load 49.1 N
Shaft Maximum Radial Load 98.1 N

Warning


Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.

 

Resources

Specifications

Part. No. : 3326
NEMA : 17
WINDING : Bipolar
Shaft Diam. mm : 8

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 3326_0 - 42STH38 NEMA-17 Bipolar Stepper with 14:1 Gearbox

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. 3531 - Optical Rotary Encoder HKT22

    193531 3531 - Optical Rotary Encoder HKT22

    This low-cost encoder is designed to fit on the rear shaft of our stepper motors. Measure the rotation of your motor even whefalse
    Excl. Tax:
    €31.02
    Incl. Tax:
    €37.84
      Compare
  2. 3338 - Stepper Mounting Bracket (NEMA 17)

    193338 3338 - Stepper Mounting Bracket (NEMA 17)

    Fix a NEMA-17 sized motor or 36mm gearbox to a flat surface with this steel mounting bracket.
    Excl. Tax:
    €4.79
    Incl. Tax:
    €5.84
      Compare
  3. 3324 - 42STH38 NEMA-17 Bipolar Gearless Stepper

    193324 3324 - 42STH38 NEMA-17 Bipolar Gearless Stepper

    This affordable bipolar stepper with a rear shaft has a 1.8° step angle and 3.3 kg·cm of torque at low speeds.
    Excl. Tax:
    €20.43
    Incl. Tax:
    €24.92
      Compare
  4. Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

    120349 Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

    This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has false
    Excl. Tax:
    €37.20
    Incl. Tax:
    €45.38
      Compare