Details
Product Description
The 3805 Enclosure is designed to protect the Rev 2 version of the 1023 – PhidgetRFID while giving you access to all terminals and connectors through openings in the enclosure.
You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.
Note:The Phidget board is not included with the enclosure and must be purchased separately
| Fits Board Revision | 0 |
| Material | Clear Acrylic |
| Thickness | 3.17mm (1/8") |
| IP rating | 20 |
- 6 clear acrylic pieces
- Mounting Hardware (Nuts, bolts, spacers)
- Small Phillips screwdriver
 |
Be careful when tightening the mounting screws as too much tension could crack the acrylic. |
|
DFRduino UNO R3 - Arduino Compatible 
Excl. Tax:
€15.70
Incl. Tax:
€19.15
|
|
ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET 
|
-
199010 16x Isolated Digital Input Phidget
Excl. Tax:€49.00Incl. Tax:€59.78 -
199008 4x Digital Input Phidget
Excl. Tax:€12.00Incl. Tax:€14.64 -
199006 Wheatstone Bridge Phidget
Excl. Tax:€29.10Incl. Tax:€35.50 -
199004 Isolated 16-bit Voltage Output P...
Excl. Tax:€49.00Incl. Tax:€59.78 -
199002 12-bit Voltage Output Phidget
Excl. Tax:€15.00Incl. Tax:€18.30
You have no items to compare.
