344760 4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB
Categories
Prices are VAT included
€9.33 Price
€7.65 + VAT

 

Details

Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. These encoders have a top-entry, 6-pin male JST SH-type connector, and we have cables that work with them available in several lengths (12 cm30 cm, and 75 cm). This module is compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions.

This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors and cables are not included with this kit). The encoder board senses the rotation of the magnetic disc and provides a resolution of 12 counts per revolution of the motor shaft when counting both edges of both channels. To compute the counts per revolution of the gearbox output shaft, multiply the gear ratio by 12. This compact encoder solution fits within the 12 mm × 10 mm cross section of the motors on three of the four sides, and it extends 2.8 mm past the edge of the fourth side.

Dimensions

Size: 12.8 mm × 11.6 mm1
Weight: 1.5 g2

General specifications

Minimum operating voltage: 2.7 V
Maximum operating voltage: 18 V
Connector: top-entry, 6-pin male, JST SH-type

Identifying markings

PCB dev codes: enc03c
Other PCB markings: 0J12460

Notes:

1 The assembled encoder will extend approximately 5 mm beyond the plastic motor end cap.
2 Weight of full set. Each encoder board weighs ~0.4 g and each magnet disc weighs ~0.3 g.

Product Page -->

Specifications

Part. No. : 4760

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343079 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has false
    Excl. Tax:
    €21.00
    Incl. Tax:
    €25.62
      Compare
  2. 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343072 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has afalse
    Excl. Tax:
    €23.00
    Incl. Tax:
    €28.06
      Compare
  3. 2369 - 210:1 Micro Metal Gearmotor MP 6V

    342369 2369 - 210:1 Micro Metal Gearmotor MP 6V

    This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 false
    Excl. Tax:
    €19.00
    Incl. Tax:
    €23.18
      Compare
  4. 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    344797 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    Micromotoriduttore con ingranaggi in metallo, versione HPCB a 6v con asse per encoder. Dotato di spazzole long-life
    Excl. Tax:
    €15.50
    Incl. Tax:
    €18.91
      Compare
  5. 4761 - Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

    344761 4761 - Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

    Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB. Versione con connettore orizzontale
    Excl. Tax:
    €7.65
    Incl. Tax:
    €9.33
      Compare
  6. 4764 - 6-Pin Female JST SH-Style Cable 75cm

    344764 4764 - 6-Pin Female JST SH-Style Cable 75cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €3.50
    Incl. Tax:
    €4.27
      Compare
  7. 4763 - 6-Pin Female JST SH-Style Cable 30cm

    344763 4763 - 6-Pin Female JST SH-Style Cable 30cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €2.40
    Incl. Tax:
    €2.93
      Compare
  8. 4762 - 6-Pin Female JST SH-Style Cable 12cm

    344762 4762 - 6-Pin Female JST SH-Style Cable 12cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €1.90
    Incl. Tax:
    €2.32
      Compare
  9. 4769 - 6-Pin Female-Female JST SH-Style Cable 63cm

    344769 4769 - 6-Pin Female-Female JST SH-Style Cable 63cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €3.50
    Incl. Tax:
    €4.27
      Compare
  10. 4768 - 6-Pin Female-Female JST SH-Style Cable 40cm

    344768 4768 - 6-Pin Female-Female JST SH-Style Cable 40cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €3.20
    Incl. Tax:
    €3.90
      Compare
  11. 4766 - 6-Pin Female-Female JST SH-Style Cable 16cm

    344766 4766 - 6-Pin Female-Female JST SH-Style Cable 16cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €3.00
    Incl. Tax:
    €3.66
      Compare
  12. 4767 - 6-Pin Female-Female JST SH-Style Cable 25cm

    344767 4767 - 6-Pin Female-Female JST SH-Style Cable 25cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €3.10
    Incl. Tax:
    €3.78
      Compare
  13. 4765 - 6-Pin Female-Female JST SH-Style Cable 10cm

    344765 4765 - 6-Pin Female-Female JST SH-Style Cable 10cm

    Cavo JST SH-Style Cable a 6 pin. Perfetto per gli encoder Pololu per micromotori o per altri utilizzi dove e' richiesto lo stfalse
    Excl. Tax:
    €2.40
    Incl. Tax:
    €2.93
      Compare