Details
The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that measures acceleration with a full-scale range of ±3g. This board has broken out all the pins you’ll need to get the necessary data from the accelerometers. The breakout is perfect for applications like, disk drive protection, game controllers, and image stabilization.
Getting the ADXL337 Breakout set-up is easy. Simply supply the accelerometer with power (3.3V and GND), then hookup the X, Y, and Z lines of the sensor to ADC pins on your chosen development board and you will be good to go. Bandwidths can even be selected to suit the needed application, with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.
It should be noted that this breakout has a maximum voltage of 3.6V. Fortunately, you won’t need a lot of power to make the accelerometers work. In normal operating mode they typically draw about 300 µA.
Features:
- Operating Voltage: 1.8V - 3.6V
- Typical Current: 300 μA
- Range: ±3g
- 3-axis sensing
- Bandwidth adjustment with a single capacitor per axis
- 1x Mounting Hole
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (ADXL337)
- GitHub (Design Files & Example Code)
Specifications
Part. No. : | SEN-12786 |
Related Products
-
709269 Triple Axis Accelerometer Breakout - ADXL335
The ADXL335 is a triple axis accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a fullfalse -
709836 Triple Axis Accelerometer Breakout - ADXL345
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digitfalse -
712756 Triple Axis Accelerometer Breakout - MMA8452Q
The MMA8452Q has user selectable full scales of ±2g/±4g/±8g with high pass filtered data as well as non filtered data availabfalse -
808523 Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)
The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want false -
808555 Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout
Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we havefalse -
713926 SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (with Headers)
The MMA8452Q is a smart, low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. -
713963 SparkFun Triple Axis Accelerometer Breakout - LIS3DH
The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution thafalse -
713314 SparkFun Digital Temperature Sensor Breakout - TMP102
The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. -
714480 SparkFun Triple Axis Accelerometer Breakout - H3LIS331DL
The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface opfalse -
714539 SparkFun Distance Sensor Breakout - RFD77402 (Qwiic)
The SparkFun Distance Sensor Breakout utilizes the RFD77402 3D ToF (Time of Flight) sensor module from Simblee to give you thfalse -
714587 SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (Qwiic)
This breakout board makes it easy to use the tiny MMA8452Q accelerometer communicate over I2C in your project. The MMA8452Q ifalse -
714686 SparkFun VR IMU Breakout - BNO080 (Qwiic)
The BNO080 Inertial Measurement Unit (IMU) produces accurate rotation vector headings, excellently suited for VR and other hefalse