Details
Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects. The way they're cut, they're a little springy in the X Y & Z linear axis but not in the rotational axis. That means that you won't get increased backlash - so they're suitable for precision CNC work.
This coupler will connect two shafts of 5mm diameter. A perfect add on for our stepper motors. Comes with two sets of double set-screws (two per side) for secure attachment. You'll need a 2mm allen wrench to tighten/loosen the set-screws.
- Measures 1" x 0.7" diameter / 25mm x 18mm diameter
- 5mm inner diameter on both ends
- 15 grams
Specifications
| Part. No. : | 1175 |
|
ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET 
|
|
SparkFun Humidity and Temperature Sensor Breakout - SHT15 
Excl. Tax:
€34.75
Incl. Tax:
€42.40
|
-
714142 Sewable LED Ribbon - 1m, 25 LEDs...
Excl. Tax:€11.00Incl. Tax:€13.42 -
714140 Sewable LED Ribbon - 1m, 25 LEDs...
Excl. Tax:€11.00Incl. Tax:€13.42 -
714138 Sewable LED Ribbon - 1m, 50 LEDs...
Excl. Tax:€16.50Incl. Tax:€20.13 -
714277 Raspberry Pi Zero W
Excl. Tax:€12.50Incl. Tax:€15.25 -
714136 Sewable LED Ribbon - 1m, 50 LEDs...
Excl. Tax:€16.50Incl. Tax:€20.13
You have no items to compare.
-
2674 - Pololu Aluminum Scooter Wheel Adapter for 6mm Shaft
Excl. Tax:€4.55Incl. Tax:€5.55Out of stock
-
Timing Belt GT2 Profile - 2mm pitch - 6mm wide 1164mm long -
Excl. Tax:€13.70Incl. Tax:€16.71Out of stock
-
1999 - Pololu Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack)
Excl. Tax:€5.90Incl. Tax:€7.20Out of stock
-
LMN4221 - Shaft Support (Pillow) for 8mm Shaft (2pcs)
Excl. Tax:€3.40Incl. Tax:€4.15Out of stock
