711470 Qtechknow ArduSensor Learning Kit

Qtechknow ArduSensor Learning Kit

This kit boasts eight different types of sensors, including button, flex, force, magnet, temperature, light, knock, and (of course) fart. These sensors, once soldered, can easily be placed onto the ArduSensor Shield in one of four designated areas with readings from an RGB LED, a buzzer, and an LED bar graph relaying the information to you.
Categories
Prices are VAT included
€53.64 Price
€43.97 + VAT

Qty
 

Details

Have you always been curious about sensors but never knew where to start? The Qtechknow ArduSensor Learning Kit for Arduino is a fantastic option! Inside the kit are two boards, one an ArduSensor shield and the other a conglomeration of eight smaller boards that are v-scored between one another making it easier for you to solder all the sensors in first and then break apart at your own leisure.

This kit boasts eight different types of sensors, including button, flex, force, magnet, temperature, light, knock, and (of course) fart. These sensors, once soldered, can easily be placed onto the ArduSensor Shield in one of four designated areas with readings from an RGB LED, a buzzer, and an LED bar graph relaying the information to you.

This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions, but you can find an assembly guide below!

Note: This product is a collaboration with Quin atQtechknow.com. A portion of each sales goes back to him for product support and continued development.

Kit Includes:

  • 1x ArduSensor Shield PCB
  • 1x ArduSensor v-scored PCB
  • 1x Methane CNG Gas (Fart) Sensor
  • 1x Piezo Element (Knock)
  • 1x Mini Photocell (Light)
  • 1x TMP36 Sensor (Temperature)
  • 1x Reed Switch (Magnet)
  • 1x Force Sensitive Resistor (Force)
  • 1x Flex Sensor (Flex)
  • 1x LED Bar Graph
  • 1x Buzzer 2.048 KHz
  • 1x RGB LED
  • 2x Push Button Switch
  • 1x 1M Ohm Resistor
  • 3x 330 Ohm Resistor
  • 6x 10k Ohm Resistor
  • 2x 330 Ohm Resistor Network - 6-pin
  • 4x M/F Headers - 6-pin
  • 12x M/M Headers (1x 10-pin, 2x 8-pin, 9x 6-pin)

Documents:

Specifications

Part. No. : KIT-11470
Shield Type : Sensors

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on Qtechknow ArduSensor Learning Kit

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Arduino UNO R3 con microcontrollore ATmega328

    500143 Arduino UNO R3 con microcontrollore ATmega328

    This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 insteadfalse
    Excl. Tax:
    €17.30
    Incl. Tax:
    €21.11
      Compare